No abstract

Aggregation is a known consequence of nanoparticle use in biology and medicine; however, nanoparticle characterization is typically performed under the pretext of well-dispersed, aqueous conditions. Here, we systematically characterize the effects of aggregation on the alternating magnetic field induced heating and magnetic resonance (MR) imaging performance of iron oxide nanoparticles (IONPs) in non-ideal biological systems. Specifically, the behavior of IONP aggregates composed of ~10 nm primary particles, but with aggregate hydrodynamic sizes ranging from 50 nm to 700 nm, was characterized in phosphate buffered saline and fetal bovine serum suspensions, as well as in gels and cells. We demonstrate up to a 50% reduction in heating, linked to the extent of aggregation. To quantify aggregate morphology, we used a combination of hydrodynamic radii distribution, intrinsic viscosity, and electron microscopy measurements to describe the aggregates as quasifractal entities with fractal dimensions in the 1.8–2.0 range. Importantly, we are able to correlate the observed decrease in magnetic field induced heating with a corresponding decrease in longitudinal relaxation rate (R1) in MR imaging, irrespective of the extent of aggregation. Finally, we show in vivo proof-of-principle use of this powerful new imaging method, providing a critical tool for predicting heating in clinical cancer hyperthermia.

A promising route to cancer treatment is hyperthermia, facilitated by superparamagnetic iron oxide nanoparticles (SPIONs). After exposure to an alternating external magnetic field, SPIONs generate heat, quantified by their specific absorption rate (SAR, in W g(-1) Fe). However, without surface functionalization, commercially available, high SAR SPIONs (EMG 308, Ferrotec, USA) aggregate in aqueous suspensions; this has been shown to reduce SAR. Further reduction in SAR has been observed for SPIONs in suspensions containing cells, but the origin of this further reduction has not been made clear. Here, we use image analysis methods to quantify the structures of SPION aggregates in the extra- and intracellular milieu of LNCaP cell suspensions. We couple image characterization with nanoparticle tracking analysis and SAR measurements of SPION aggregates in cell-free suspensions, to better quantify the influence of cellular uptake on SPION aggregates and ultimately its influence on SAR. We find that in both the intra- and extracellular milieu, SPION aggregates are well-described by a quasifractal model, with most aggregates having fractal dimensions in the 1.6-2.2 range. Intracellular aggregates are found to be significantly larger than extracellular aggregates and are commonly composed of more than 10(3) primary SPION particles (hence they are "superaggregates"). By using high salt concentrations to generate such superaggregates and measuring the SAR of suspensions, we confirm that it is the formation of superaggregates in the intracellular milieu that negatively impacts SAR, reducing it from above 200 W g(-1) Fe for aggregates composed of fewer than 50 primary particles to below 50 W g(-1) for superaggregates. While the underlying physical mechanism by which aggregation leads to reduction in SAR remains to be determined, the methods developed in this study provide insight into how cellular uptake influences the extent of SPION aggregation, and enable estimation of the reduction of SAR brought about via uptake induced aggregation.

No abstract

Tungsten oxide nanorods were prepared from W2N film by a simple annealing method. W2N film was deposited on a Si(100) substrate by chemical vapour deposition (CVD) at 450 °C, and then heating of the film at 600–700 °C produces a high density of tungsten oxide nanorods. The morphology, structure, composition and chemical binding states of the prepared nanorods were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), energy dispersive x-ray analysis (EDX) and transmission electron microscopy (TEM) measurements. XRD and TEM analysis showed that the grown nanorods were single-crystalline W18O49. According to XPS analysis, the W18O49 nanorods contained ∼62% of W6+, ∼28% of W5+, and ∼10% of W4+. Field-emission measurements showed a low turn-on field of 9.5 V µm−1 for the W18O49 nanorods, indicating that they can be used as potential field emitters. Also, a synthesis reaction mechanism based on thermodynamics is proposed for the growth of tungsten oxide nanorods from W2N.