Understanding the oxygen evolution reaction (OER) activity and stability of the NiFe-based materials is important for achieving low-cost and highly efficient electrocatalysts for practical water splitting. Here, we report the roles of Ni and Fe on the OER activity and stability of metallic NiFe and pure Ni thin films in alkaline media. Our results support that Ni(OH) 2 /NiOOH does not contribute to the OER directly, but it serves as an ideal host for Fe incorporation, which is essential for obtaining high OER activity. Furthermore, the availability of Fe in the electrolyte is found to be important and necessary for both NiFe and pure Ni thin films to maintain an enhanced OER performance, while the presence of Ni is detrimental to the OER kinetics. The impacts of Fe and Ni species present in KOH on the OER activity are consistent with the dissolution/re-deposition mechanism we proposed. Stability studies show that the OER activity will degrade under prolonged continuous operation. Satisfactory stability can, however, be achieved with intermittent OER operation, in which the electrocatalyst is cycled between degraded and recovered states. Accordingly, two important ranges, that is, the recovery range and the degradation range, are proposed. Compared to the intermittent OER operation, prolonged continuous OER operation (i.e., in the degradation range) generates a higher NiOOH content in the electrocatalyst, which is likely related to the OER deactivation. If the electrode works in the recovery range for a certain period, that is, at a sufficiently low reduction potential, where Ni 3+ is reduced to Ni 2+ , the OER activity can be maintained and even improved if Fe is also present in the electrolyte.
Nickel‐molybdenum (NiMo) alloys can be a possible alternative to platinum as hydrogen evolution reaction (HER) catalysts because of the superior HER activity. However, the superior HER activity and the pH‐dependent kinetics are not currently fully understood. Herein, we present a study of HER kinetics and mechanisms of NiMo in alkaline, near‐neutral and acidic media by combining voltammetry measurements with electrochemical impedance spectroscopy and a microkinetic model. The results indicate that, compared to Ni, NiMo has significantly higher active surface area and intrinsic HER activity. In the subsequent measurements, we demonstrated that different from the existing explanations to the HER mechanisms for NiMo, the HER process in acidic, near‐neutral, and alkaline media is controlled by the Heyrovsky step. Our results show that increasing pH increases the hydrogen coverage, which increases the Tafel‐slope at low overpotentials, eventually resulting in only a single Tafel slope, which would commonly be interpreted as a Volmer‐limited reaction. Furthermore, the studies of thickness effect on HER kinetics show that the HER kinetics of NiMo are thickness‐dependent. In phosphate buffer, the increase in thickness did not significantly increase the double‐layer capacitance, but simulations with the microkinetic model indicate that the active surface area still increased similarly to other electrolytes, which is likely related to the type of electrolyte used.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.