This paper proposes a calibration method for a coordinate measuring machine (CMM) using a laser tracking system. The laser tracking system can measure three-dimensional coordinates based on the principle of trilateration with high accuracy and is easy to set up. The accuracy of length measurement of a single laser tracking interferometer (laser tracker) is about 0.3 µm over a length of 600 mm. In this study, we first measured 3D coordinates using the laser tracking system. Secondly, 21 geometric errors, namely, parametric errors of the CMM, were estimated by the comparison of the coordinates obtained by the laser tracking system and those obtained by the CMM. As a result, the estimated parametric errors agreed with those estimated by a ball plate measurement, which demonstrates the validity of the proposed calibration system.

A spherical cat's-eye retroreflector made from a glass material having a refractive index of two was developed. The geometrical sphericity of the cat's eye and the sphericity examined optically were approximately 100 nm and 500 nm respectively. The discrepancy between these two values is discussed. This optical device is very versatile in terms of applications since it is free from viewing angle restrictions.

a b s t r a c tA tracking interferometer is a laser interferometer with the mechanism to steer the laser direction to automatically follow a target retroreflector. This paper experimentally investigates the performance of the tracking interferometer prototype, developed by a part of the authors, in estimating the volumetric accuracy of a machining center based on the multilateration principle. Then, the prototype's technical issues are discussed based on the measurement uncertainty analysis. This paper briefly reviews the direct algorithm to calculate the three-dimensional position of the target, as well as the indirect algorithm to estimate geometric error parameters of the machine's kinematic model. Their comparison is also presented based on the uncertainty analysis.

No abstract

No abstract