No abstract

Radio-frequency energy harvesting constitutes an effective way to prolong the lifetime of wireless networks, wean communication devices off the battery and power line, benefit the energy saving and lower the carbon footprint of wireless communications. In this paper, an interference aided energy harvesting scheme is proposed for cooperative relaying systems, where energy-constrained relays harvest energy from the received information signal and cochannel interference signals, and then use that harvested energy to forward the correctly decoded signal to the destination. The time-switching scheme (TS), in which the receiver switches between decoding information and harvesting energy, as well as the power-splitting scheme (PS), where a portion of the received power is used for energy harvesting and the remaining power is utilized for information processing, are adopted separately. Applying the proposed energy harvesting approach to a decode-and-forward relaying system with the three-terminal model, the analytical expressions of the ergodic capacity and the outage capacity are derived, and the corresponding achievable throughputs are determined. Comparative results are provided and show that PS is superior to TS at high signal-to-noise ratio (SNR) in terms of throughput, while at low SNR, TS outperforms PS. Furthermore, considering different interference power distributions with equal aggregate interference power at the relay, the corresponding system capacity relationship, i.e., the ordering of capacities, is obtained.

Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more efficient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary splitring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired by MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling configurations that have negligible consequence on the array's characteristics such as bandwidth, gain and radiation efficiency, and physical footprint. INDEX TERMS Decoupling methods, metamaterial (MTM), metasurface (MTS), multiple-input-multiple-output (MIMO), synthetic aperture radar (SAR), isolation enhancement, array antennas.