Low-dimensional perovskite-related metal halides have emerged as a new class of light-emitting materials with tunable broadband emission from self-trapped excitons (STEs). Although various types of low-dimensional structures have been developed, fundamental understating of the structure−property relationships for this class of materials is still very limited, and further improvement of their optical properties remains greatly important. Here, we report a significant pressure-induced photoluminescence (PL) enhancement in a one-dimensional hybrid metal halide C 4 N 2 H 14 PbBr 4 , and the underlying mechanisms are investigated using in situ experimental characterization and first-principles calculations. Under a gigapascal pressure scale, the PL quantum yields (PLQYs) were quantitatively determined to show a dramatic increase from the initial value of 20% at ambient conditions to over 90% at 2.8 GPa. With in situ characterization of photophysical properties and theoretical analysis, we found that the PLQY enhancement was mainly attributed to the greatly suppressed nonradiative decay. Pressure can effectively tune the energy level of self-trapped states and increase the exciton binding energy, which leads to a larger Stokes shift. The resulting highly localized excitons with stronger binding reduce the probability for carrier scattering, to result in the significantly suppressed nonradiative decay. Our findings clearly show that the characteristics of STEs in low-dimensional metal halides can be well-tuned by external pressure, and enhanced optical properties can be achieved.

Pressure processing is efficient to regulate the structural and physical properties of two-dimensional (2D) halide perovskites which have been emerging for advanced photovoltaic and light-emitting applications. Increasing numbers of studies have reported pressure-induced and/or enhanced emission properties in the 2D halide perovskites. However, no research has focused on their photoresponse properties under pressure tuning. It is also unclear how structural change affects their excitonic features, which govern the optoelectronic properties of the halide perovskites. Herein, we report significantly enhanced photocurrents in the all-inorganic 2D perovskite Cs2PbI2Cl2, achieving over 3 orders of magnitude increase at the industrially achievable level of 2 GPa in comparison with its initial photocurrent. Lattice compression effectively regulates the excitonic features of Cs2PbI2Cl2, reducing the exciton binding energy considerably from 133 meV at ambient conditions to 78 meV at 2.1 GPa. Impressively, such a reduced exciton binding energy of 2D Cs2PbI2Cl2 is comparable to the values of typical 3D perovskites (MAPbBr3 and MAPbI3), facilitating the dissociating of excitons into free carriers and enhancing the photocurrent. Further pressurization leads to a layer-sliding-induced phase transition and an anomalous negative linear compression, which has not been observed so far in other halide perovskites. Our findings reveal the dramatically enhanced photocurrents in the 2D halide perovskite by regulating its excitonic features and, more broadly, provide new insights into materials design toward extraordinary properties.

The electron–phonon (e–ph) interaction in lead halide perovskites (LHPs) plays a role in a variety of physical phenomena. Unveiling how the local lattice distortion responds to charge carriers is a critical step toward understanding the e–ph interaction in LHPs. Herein, we advance a fundamental understanding of the e–ph interaction in LHPs from the perspective of stereochemical activity of 6s2 lone-pair electrons on the Pb2+ cation. We demonstrate a model system based on three LHPs with distinctive lone-pair activities for studying the structure–property relationships. By tuning the A-cation chemistry, we synthesized single-crystal CsPbBr3, (MA0.13EA0.87)­PbBr3 (MA+ = methylammonium; EA+ = ethylammonium), and (MHy)­PbBr3 (MHy+ = methylhydrazinium), which exhibit stereo-inactive, dynamic stereo-active, and static stereo-active lone pairs, respectively. This gives rise to distinctive local lattice distortions and low-frequency vibrational modes. We find that the e–ph interaction leads to a blue shift of the band gap as temperature increases in the structure with the dynamic stereo-active lone pair but to a red shift in the structure with the static stereo-active lone pair. Furthermore, analyses of the temperature-dependent low-energy photoluminescence tails reveal that the strength of the e–ph interaction increases with increasing lone-pair activity, leading to a transition from a large polaron to a small polaron, which has significant influence on the emission spectra and charge carrier dynamics. Our results highlight the role of the lone-pair activity in controlling the band gap, phonon, and polaronic effect in LHPs and provide guidelines for optimizing the optoelectronic properties, especially for tin-based and germanium-based halide perovskites, where stereo-active lone pairs are more prominent than their lead counterparts.

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)2(GA)Pb2I7 (HA=n‐hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non‐luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above‐band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two‐fold higher PL emission compared with the pristine (HA)2(GA)Pb2I7.

Lone-pair electrons (LPEs) ns2 in subvalent 14 and 15 groups lead to highly anharmonic lattice and strong distortion polarization, which are responsible for the groups’ outstanding thermoelectric and optoelectronic properties. However, their dynamic stereochemical role in structural and physical properties is still unclear. Here, by introducing pressure to tune the behavior of LPEs, we systematically investigate the lone-pair stereochemical role in a Bi2O2S. The gradually suppressed LPEs during compression show a nonlinear repulsive electrostatic force, resulting in two anisotropic structural transitions. An orthorhombic-to-tetragonal phase transition happens at 6.4 GPa, caused by the dynamic cation centering. This structural transformation effectively modulates the optoelectronic properties. Further compression beyond 13.2 GPa induces a 2D-to-3D structural transition due to the disappearance of the Bi-6s2 LPEs. Therefore, the pressure-induced LPE reconfiguration dominates these anomalous variations of lattice, electronic, and optical properties. Our findings provide new insights into the materials optimization by regulating the characters of LPEs.

Metal halide perovskites possess unique atomic and electronic configurations that endow them with high defect tolerance and enable high-performance photovoltaics and optoelectronics[1–3]. Perovskite light-emitting diodes have achieved an external quantum efficiency of over 20%[4–5]. Despite tremendous progress, fundamental questions remain, such as how structural distortion affects the optical properties. Addressing their relationships is considerably challenging due to the scarcity of effective diagnostic tools during structural and property tuning as well as the limited tunability achievable by conventional methods. Here, using pressure and chemical methods to regulate the metal off-centering distortion, we demonstrate the giant tunability of photoluminescence (PL) in both the intensity (>20 times) and wavelength (>180 nm/GPa) in the highly-distorted halide perovskites [CH3NH3GeI3, HC(NH2)2GeI3, and CsGeI3]. Using advanced in situ high-pressure probes and first-principles calculations, we quantitatively reveal a universal relationship whereby regulating the level of off-centering distortion towards 0.2 leads to the best PL performance in the halide perovskites. By applying this principle, intense PL can still be induced by substituting CH3NH3+ with Cs+ to control the distortion in (CH3NH3)1-xCsxGeI3, where the chemical substitution plays a similar role as external pressure. The compression of a fully substituted sample of CsGeI3 further tunes the distortion to the optimal value at 0.7 GPa, which maximizes the emission with a ten-fold enhancement. This work not only demonstrates a quantitative relationship between structural distortion and PL property of the halide perovskites but also illustrates the use of knowledge gained from high-pressure research to achieve the desired properties by ambient methods.

Low-dimensional hybrid metal halides are emerging as a highly promising class of single-component white-emitting materials for their unique broadband emission from self-trapped excitons (STEs). Despite substantial progress in the development of these metal halides, many challenges remain to be addressed to obtain a better fundamental understanding of the structure-property relationship and realize the full potentials of this class of materials. Here, via pressure regulation, a near 100% photoluminescence quantum yield (PLQY) of broadband emission is achieved in a corrugated 1D hybrid metal halide C 5 N 2 H 16 Pb 2 Br 6 , which possesses a highly distorted structure with an initial PLQY of 10%. Compression reduces the overlap between STE states and ground state, leading to a suppressed phonon-assisted non-radiative decay. The PL evolution is systematically demonstrated to be controlled by the pressure-regulated exciton-phonon coupling which can be quantified using Huang-Rhys factor S. Detailed studies of the S-PLQY relation for a series of 1D hybrid metal halides

Prussian blue analogues (PBA) recently have received great interest for promising applications in low-cost sodium-ion batteries (SIBs). However, controlled synthesis of high-performance PBA is still challenging. In this work, a facile precipitation route was used to synthesize Na-rich PBAs with superior electrochemical performance. It was found that two shapes of the products, namely, small irregular particles and large cuboid particles, coexist by adding sodium citrate in the sodium hexacyanoferrate side during the synthesis. The product shows large capacity (144 mAh g–1 under a 0.1 C rate), good rate performance (115.6 mAh g–1 under a 1 C rate, 86.6 mAh g–1 under a 10 C rate), and long-term cycling stability (73.4% retention after 780 cycles under a 0.5 C rate, 72.7% retention after 2100 cycles under a 1 C rate). This work offers a promising route to prepare PBA-based cathode materials for high-performance SIBs.