No abstract

No abstract

Monolithic on-chip inductors are key passive devices in radio frequency integrated circuits (RFICs). Currently, 70–80% of the on-wafer area of most RFIC chips is occupied by the sprawling planar spiral inductors, and its operation frequency is limited to a few GHz. With continuous scaling of the transistor technology, miniaturization and high frequency operation of inductors have become the bottleneck to meet future demands of wireless communication systems. Here we report on-chip self-rolled-up 3D microtube inductors with extremely small footprint, unprecedented high frequency performance and weak dependence on substrate conductivity. The serpentine metal strips are deposited on an oppositely strained silicon nitrides (SiNx) bilayer. After releasing from the sacrificial layer underneath, the metal/SiNx layer is scrolled into a 3D hollow tubular structure by the strain induced unidirectional self-rolled-up technology. Compared to the planar spiral inductors with similar inductances and quality (Q) factors, the footprint of tube inductors is reduced by as much as two orders of magnitude, and the frequency at peak Q factor improves more than 5 times on doped substrates. The self-rolled-up 3D nanotechnology platform employed here, that “processes in 2D but functions in 3D”, is positioned to serve as a global solution for extreme RFIC miniaturization with improved performance.

No abstract

We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works with similar feature sizes, because of its simultaneously fast phase velocity, large coupling coefficient, and low-loss. In this work, the propagation characteristics of the A1 mode in lithium niobate is analytically modeled and validated with finite element analysis. The design space of A1 ADLs is then investigated, including both the fundamental design parameters and those introduced from the practical implementation. The implemented ADLs at 5 GHz show a minimum insertion loss of 7.9 dB, an average IL of 9.1 dB, and a fractional bandwidth around 4%, with delays ranging between 15 ns to 109 ns and the center frequencies between 4.5 GHz and 5.25 GHz. The propagation characteristics of A1 mode acoustic waves have also been extracted for the first time. The A1 ADL platform can potentially enable wide-band high-frequency passive signal processing functions for future 5G applications in the sub-6 GHz spectrum bands.