This paper looks into the modulation classification problem for a distributed wireless spectrum sensing network. First, a new data-driven model for Automatic Modulation Classification (AMC) based on long short term memory (LSTM) is proposed. The model learns from the time domain amplitude and phase information of the modulation schemes present in the training data without requiring expert features like higher order cyclic moments. Analyses show that the proposed model yields an average classification accuracy of close to 90% at varying SNR conditions ranging from 0dB to 20dB. Further, we explore the utility of this LSTM model for a variable symbol rate scenario. We show that a LSTM based model can learn good representations of variable length time domain sequences, which is useful in classifying modulation signals with different symbol rates. The achieved accuracy of 75% on an input sample length of 64 for which it was not trained, substantiates the representation power of the model. To reduce the data communication overhead from distributed sensors, the feasibility of classification using averaged magnitude spectrum data and on-line classification on the low-cost spectrum sensors are studied. Furthermore, quantized realizations of the proposed models are analyzed for deployment on sensors with low processing power.

Advances in low-power and low-cost sensor networks have led to solutions mature enough for use in a broad range of applications varying from health monitoring to building surveillance. The development of those applications has been stimulated by the finalization of the IEEE 802.15.4 standard, which defines the medium access control (MAC) and physical layer for sensor networks. One of the MAC schemes proposed is slotted Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), and this paper analyzes whether this scheme meets the design constraints of those low-power and low-cost sensor networks. The paper provides a detailed analytical evaluation of its performance in a star topology network, for uplink and acknowledged uplink traffic. Both saturated and unsaturated periodic traffic scenarios are considered. The form of the analysis is similar to that of Bianchi for IEEE 802.11 DCF only in the use of a per user Markov model to capture the state of each user at each moment in time. The key assumptions to enable this important simplification and the coupling of the per user Markov models are however different, as a result of the very different designs of the 802.15.4 and 802.11 carrier sensing mechanisms. The performance predicted by the analytical model is very close to that obtained by simulation. Throughput and energy consumption analysis is then performed by using the model for a range of scenarios. Some design guidelines are derived to set the 802.15.4 parameters as function of the network requirements.

The use of unmanned aerial vehicles (UAVs) that serve as aerial base stations is expected to become predominant in the next decade. However, in order for this technology to unfold its full potential it is necessary to develop a fundamental understanding of the distinctive features of air-to-ground (A2G) links. As a contribution in this direction, this paper proposes a generic framework for the analysis and optimization of the A2G systems.In contrast to the existing literature, this framework incorporates both height-dependent path loss exponent and small-scale fading, and unifies a widely used ground-to-ground channel model with that of A2G for analysis of large-scale wireless networks. We derive analytical expressions for the optimal UAV height that minimizes the outage probability of a given A2G link. Moreover, our framework allows us to derive a height-dependent closed-form expression and a tight lower bound for the outage probability of an A2G cooperative communication network. Our results suggest that the optimal location of the UAVs with respect to the ground nodes does not change by the inclusion of ground relays. This enables interesting insights in the deployment of future A2G networks, as the system reliability could be adjusted dynamically by adding relaying nodes without requiring changes in the position of the corresponding UAVs. Index TermsAir-to-ground (A2G) communication, unmanned aerial vehicle (UAV), aerial base station, outage probability, Rician fading, inverse Marcum Q-function, cooperative communication, Poisson point process (PPP)

No abstract

Enabling the integration of aerial mobile users into existing cellular networks would make possible a number of promising applications. However, current cellular networks have not been designed to serve aerial users, and hence an exploration of design parameters is required in order to allow network providers to modify their current infrastructure. As a first step in this direction, this paper provides an in-depth analysis of the coverage probability of the downlink of a cellular network that serves both aerial and ground users. We present an exact mathematical characterization of the coverage probability, which includes the effect of base stations (BSs) height, antenna pattern and drone altitude for various types of urban environments. Interestingly, our results show that the favorable propagation conditions that aerial users enjoy due to their altitude is also their strongest limiting factor, as it leaves them vulnerable to interference. This negative effect can be substantially reduced by optimizing the flying altitude, the base station height and antenna down-tilt angle. Moreover, lowering the base station height and increasing down-tilt angle are in general beneficial for both terrestrial and aerial users, pointing out a possible path to enable their coexistence.

No abstract

Providing low power and long range (LoRa) connectivity is the goal of most Internet of Things networks, e.g., LoRa, but keeping communication reliable is challenging. LoRa networks are vulnerable to the capture effect. Cell-edge nodes have a high chance of losing packets due to collisions, especially when high spreading factors (SFs) are used that increase time on air. Moreover, LoRa networks face the problem of scalability when they connect thousands of nodes that access the shared channels randomly. In this paper, we propose a new MAC layer-RS-LoRa-to improve reliability and scalability of LoRa wide-area networks (LoRaWANs). The key innovation is a two-step lightweight scheduling: 1) a gateway schedules nodes in a coarse-grained manner through dynamically specifying the allowed transmission powers and SFs on each channel and 2) based on the coarse-grained scheduling information, a node determines its own transmission power, SF, and when and on which channel to transmit. Through the proposed lightweight scheduling, nodes are divided into different groups, and within each group, nodes use similar transmission power to alleviate the capture effect. The nodes are also guided to select different SFs to increase the network reliability and scalability. We have implemented RS-LoRa in NS-3 and evaluated its performance through extensive simulations. Our results demonstrate the benefit of RS-LoRa over the legacy LoRaWAN, in terms of packet error ratio, throughput, and fairness. For instance, in a singlecell scenario with 1000 nodes, RS-LoRa can reduce the packet error ratio of the legacy LoRaWAN by nearly 20%.

The growing use of aerial user equipments (UEs) in various applications requires ubiquitous and reliable connectivity for safe control and data exchange between these devices and ground stations. Key questions that need to be addressed when planning the deployment of aerial UEs are whether the cellular network is a suitable candidate for enabling such connectivity, and how the inclusion of aerial UEs might impact the overall network efficiency. This paper provides an in-depth analysis of user and network level performance of a cellular network that serves both unmanned aerial vehicles (UAVs) and ground users in the downlink. Our results show that the favorable propagation conditions that UAVs enjoy due to their height often backfire on them, as the increased co-channel interference received from neighboring ground BSs is not compensated by the improved signal strength. When compared with a ground user in an urban area, our analysis shows that a UAV flying at 100 meters can experience a throughput decrease of a factor 10 and a coverage drop from 76% to 30%. Motivated by these findings, we develop UAV and network based solutions to enable an adequate integration of UAVs into cellular networks. In particular, we show that an optimal tilting of the UAV antenna can increase their coverage and throughput from 23% to 89% and from 3.5 b/s/Hz to 5.8 b/s/Hz, respectively, outperforming ground UEs. Furthermore, our findings reveal that depending on UAV altitude, the aerial user performance can scale with respect to the network density better than that of a ground user. Finally, our results show that network densification and the use of micro cells limit UAV performance. While UAV usage has the potential to increase area spectral efficiency (ASE) of cellular networks with moderate number of cells, they might hamper the development of future ultra dense networks.