The demand for wearable technologies has grown tremendously in recent years. Wearable antennas are used for various applications, in many cases within the context of wireless body area networks (WBAN). In WBAN, the presence of the human body poses a significant challenge to the wearable antennas. Specifically, such requirements are required to be considered on a priority basis in the wearable antennas, such as structural deformation, precision, and accuracy in fabrication methods and their size. Various researchers are active in this field and, accordingly, some significant progress has been achieved recently. This article attempts to critically review the wearable antennas especially in light of new materials and fabrication methods, and novel designs, such as miniaturized button antennas and miniaturized single and multi-band antennas, and their unique smart applications in WBAN. Finally, the conclusion has been drawn with respect to some future directions.

In this paper, we present the design and fabrication of a novel class of emerging waveguide filters based on chained-functions at the millimeter-wave band. The derivation of chained-functions by chaining of prescribed generalized Chebyshev seed functions based on the partition theory is presented in details, and the implementation to waveguide technology is proposed and evaluated. The waveguide filter is fabricated through two different technologies, namely the Computer Numerical Control (CNC) milling technology and the Direct Metal Laser Sintering (DMLS) based additive manufacturing technology. The chained-function filters, which lie in between the Butterworth and Chebyshev filters, inherit the salient properties of both Butterworth and Chebyshev filters. Therefore, the chained-function waveguide filter exhibits filtering responses that have a superior rejection property and a lower loss with reduced sensitivity to fabrication tolerance than the standard Chebyshev waveguide filter. The efficiency of the proposed waveguide filter is confirmed both theoretically and empirically, using the CNC and DMLS processes. The issues of a higher manufacturing tolerance and apparent surface roughness associated with the DMLS method are found to be electrically insignificant when the chained-function concept is adopted in waveguide filter design. In general, the measured results of all the realized waveguide filters agree well to those of the simulation models. These results positively demonstrate that the chainedfunction concept has robust properties for rapid, high-performance, low-cost, and sustainable filter design and implementation, particularly for higher millimeter-wave frequency bands and for narrowband applications.

Photovoltaic (PV) panels are increasingly used to convert sunlight into electricity, as a source of sustainable energy. It can be used in a wide variety of applications ranging from the well-known power generation to the emerging energy harvesting in Internet of Things (IoT). Hence, an accurate model is required to evaluate and predict the performance of the PV panel. However, the non-linear characteristics of PV panels make the modeling of their electrical response a challenging task. In the literature, most of the previous PV models have been developed for large wattage PVs under high irradiance, or for small wattage PVs under lower irradiance. Those that can model both usually require more information, including the I-V curves data at different irradiances, which is not always provided by the manufacturers. Therefore, this paper presents a simple PV modeling that can be applied for different wattage panels at different operating levels of irradiance, using only the commonly provided datasheet values at standard test condition (STC). The model uses the characteristic points translation technique to translate the short circuit current, open circuit voltage and maximum power voltage points, at STC to other operating conditions. These translated values are then used by the parameter extraction technique to extract the model's parameters. The proposed model's techniques can model the losses across the resistors at low irradiance, which reduces the error. The accuracy of the proposed model is validated using two representative commercial PV panels. Results are generated for the proposed model and other comparative works. The results show that the proposed model can improve the accuracy over the other compared works, with a consistent percentage difference of below 5% across all levels of irradiances for both panels.

The human body is an extremely challenging environment for wearable antennas due to the complex antenna-body coupling effects. In this article, a compact flexible dual-band planar meander line monopole antenna (MMA) with a truncated ground plane made of multiple layers of standard off-the-shelf materials is evaluated to validate its performance when worn by different subjects to help the designers who are shaping future complex on-/off-body wireless devices. The antenna was fabricated, and the measured results agreed well with those from the simulations. As a reference, in free-space, the antenna provided omnidirectional radiation patterns (ORP), with a wide impedance bandwidth of 1282.4 (450.5) MHz with a maximum gain of 3.03 dBi (4.85 dBi) in the lower (upper) bands. The impedance bandwidth could reach up to 688.9 MHz (500.9 MHz) and 1261.7 MHz (524.2 MHz) with the gain of 3.80 dBi (4.67 dBi) and 3.00 dBi (4.55 dBi), respectively, on the human chest and arm. The stability in results shows that this flexible antenna is sufficiently robust against the variations introduced by the human body. A maximum measured shift of 0.5 and 100 MHz in the wide impedance matching and resonance frequency was observed in both bands, respectively, while an optimal gap between the antenna and human body was maintained. This stability of the working frequency provides robustness against various conditions including bending, movement, and relatively large fabrication tolerances.

Many Automatic Identification (Auto-ID) technologies such as bar codes, magnetic stripes, Optical Character Recognition (OCR) and Electronic Article Surveillance (EAS) security tags are in existence. However, they are limited by a variety of constraints on them such as limited object rate of scan, need for Line-of-Sight (LOS) operation, very small interrogation range and poor accuracy in complex environments. Research has accordingly grown rapidly in recent years into the development of robust identification or tracking mechanisms. Radio Frequency Identification (RFID) technology using readers and RFID tags, whether passive, semi-passive or active in nature, has been deemed to be a promising candidate. Silicon based IC tags are quite popular. However, some alternative RFID technologies have also been on the rise. In particular, another special type of tag based on Surface Acoustic Wave (SAW) design also has a great potential for deployment in future identification fields due to its ruggedness against harsh conditions, metallic environments, interference, small and low cost and is being thoroughly reviewed, which is ignored in other survey papers. While other chipless RFID systems based on conductive ink, ink-tattoo and others do exist, negative aspects such as inability to survive in extreme weather, larger tag size and limited data storage capacity have severely impacted the penetration of such tags in the RFID market. Therefore, the scope of this survey article does not include chipless RFID tags. This article instead provides a comparative survey of silicon based IC and SAW based tags, which has attracted much attention from both academia and industry. The underlying characteristics, principles, advantages, and limitations of such tags are thoroughly discussed, and relevant research work followed by frequency of operation and other parameters are elaborated. This article undertakes a thorough investigation into the evolution of RFID technology and comparison into the current trend in silicon based IC and SAW based RFID tags and provides a comparison across many metrics, such as read range, tag size, tag power, availability of tag power, lifespan and more importantly, cost and security. It discusses active and passive tags under silicon based IC and SAW technology. Finally, the article reviews recent advances and provides potentials, open challenges and future research directions in such RFID tags. INDEX TERMS RFID tracking/identification, surface acoustic wave (SAW), interdigital transducer (IDT), silicon based integrated circuit (IC) RFID tags, near field, far field communication. 2) ELECTROMAGNETIC BACKSCATTER/FAR FIELD RFID COMMUNICATION

A water quality monitoring application often requires the deployment of Internet of Things (IoT) sensors over a wide water body with communication links among them to transmit, receive the data, and then uplink it to the cloud for further analytics. Deployment of this kind requires battery-assisted IoT sensors which require monitoring the battery level and replacement when necessary. It is thus desirable to have battery-free sensortags and a suitable communication infrastructure to obtain data. In this paper, a system that facilitates obtaining sensed data, like pH, through passive sensor-tags based on Surface Acoustic Wave (SAW) technology and a cellular code-reuse scheme based reader infrastructure is proposed. The reader in each cell is able to read multiple sensor-tags simultaneously, which itself has been a challenge. The SAW sensor tags are appropriately proposed to be designed to be orthogonal to allow simultaneous detection and the cell range of reader-SAW sensor-tags communication is sought to be further enhanced through a resonant loading of Interdigital Transducer (IDT) based reflectors.

This paper presents the design of multi-band filters using parallel connected topology. The resonator in each branch is the dual-mode resonator which provides two resonant modes per passband for miniaturization. The coupling values of the resonator are obtained by mapping the filtering function of the dual-mode resonator to the second order Chebyshev polynomial. The control of the filter parameters, such as pass-band bandwidths and band separation, is addressed. Dual-band and triple-band filter prototypes are designed and fabricated to validate the proposed concept. The measured results show good agreement with the simulations.

No abstract