In this paper the influence of tack welds distribution and welding sequence on angular distortion of the Tungsten Inert Gas (TIG) welded joint was tested. Additionally, the effect of welding current on angular distortion was assessed. For research X2CrTiNb18 (AISI 441) stainless steel (2.5 mm thick) was chosen. During research specimens were prepared with different distributions of tack welds. Then they were welded by different welding sequences with the use of different welding current values. After welding the angular distortion of each specimen was measured by using the coordinate measuring machine. In the next step specimens were cut. Cross-sections were polished and the metallographic macroscopic testing was conducted to check the geometry of performed welds. Performed experiments allowed determining the optimal tack weld sequence and welding parameters for welding thin stainless steel sheets.
This paper presents the results of cutting aluminum foams. The experiment includes the following mechanical methods of cutting: circular saw cutting, band-saw cutting, EDM cutting, water-jet cutting, and thermal cutting methods: laser cutting and air plasma cutting. The influence of the cutting method on the edge geometry was specified in the paper. EDM was defined as the most advantageous method of Al foam cutting, as providing the best aluminium foam edges surface quality for welding.
Mikrostruktura i właściwości stali o wysokiej wytrzymałości AHSSMicrostructure and mechanical properties of advanced High - strength steels (aHss) Mgr inż. Sławomir Krajewski, prof. dr hab. inż. Jerzy Nowacki -Zachodniopomorski Uniwersytet Technologiczny w Szczecinie.
StreszczeniePrzedstawiono nowe stale o wysokiej wytrzymałości AHSS na podstawie analizy danych źródłowych. Zaprezentowano składy chemiczne i właściwości mechaniczne wybranych gatunków tych stali.Stale o wysokiej wytrzymałości coraz częściej używane są w przemyśle motoryzacyjnym oraz w budowie ciężkich maszyn. Właściwości mechaniczne i ciągliwość tych stali pozwalają na projektowanie lżejszych i bardziej wytrzymałych konstrukcji o dotąd nieosiągalnych możliwościach. Spawalność stali AHSS jest dobra. Dzięki prostemu składowi chemicznemu i małej liczbie dodatków stopowych możliwość doboru metody i parametrów spawania jest szeroka i dotyczy zarówno zgrzewania, jak i spawania metodami MMA, GTA i GMA.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.