3D printed objects are nowadays not only used in prototyping, but also in small‐scale production down to lot‐size 1. While different 3D printing techniques can be applied for this purpose, a large amount of products is prepared by the simple and inexpensive fused deposition modeling (FDM) technique, applying a polymer which is molten, pressed through a nozzle, and deposited layer‐by‐layer on a printing bed and on the previous layers, respectively. This technology, however, has the disadvantage of often insufficient mechanical properties due to the available materials and due to the construction method, which often supports air cavities inside objects, reducing the adhesion between neighboring strands and thus the overall mechanical properties. Such problems can partly be solved by chemical after‐treatments. Here, the authors report on tensile tests and load changes of the soft FDM materials FilaFlex and PLA soft (PLA = polylactic acid) in comparison with common PLA. They also show the different inner structure of objects 3D printed from these materials and their correlation with mechanical properties and material fatigue.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.