This research investigates the effects of plasticizer and durian skin fibre (DSF) loading on tensile and morphological properties of polylactic acid (PLA) biocomposites. Epoxidized palm oil (EPO) was added as a plasticizer in this project. The effect of EPO content 0-10 wt% was investigated over the tensile properties of PLA. EPO at 5 wt% was found to provide the highest tensile properties on PLA biocomposite. The plasticized PLA was then investigated for the effect of DSF content by varying the DSF at 1, 3 and 5 wt%. The tensile properties improved by about 7% with 3 wt% DSF. Scanning electron micrograph revealed that a ductile failure was induced in PLA composite with 5 wt% EPO and 3 wt% DSF.

No abstract

Packaging is an essential component in food industries. Packaging protects food from spoilage between processing and usage by the consumer. In this study, biocomposites of poly(lactic acid) (PLA) reinforced with durian skin fibre (DSF) were prepared by extrusion and compression moulding. Epoxidized palm oil (EPO) was added into PLA/DSF biocomposite as a plasticizer. The results showed that the thermal stability of PLA/DSF biocomposite with EPO has not much difference compared to without EPO. The degradation time of PLA/DSF biocomposite also faster after it was disposed to the landfill as it took around 65 days to degrade. Fourier transform infrared (FTIR) confirmed the stability of EPO where the oxirane group of EPO existed in the PLA/DSF biocomposite. Therefore, PLA/DSF biocomposite with addition of EPO can be effectively used for food packaging application.

Biopolymer products that is biodegradable presently attracting an attention from researchers and industry. The biodegradable packaging based on polylactic acid (PLA), durian skin fibre (DSF), epoxidized palm oil (EPO) and incorporated with cinnamon essential oil (CEO) as antimicrobial agent have been developed and showed to be a promising field of research. This paper reported the effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite films produced via solvent casting. The biocomposites underwent supercritical carbon dioxide (SCCO2) treatment at two different conditions under 40 °C temperature and at 100 bar and 200 bar pressure. Water absorption test showed that the untreated PLA biocomposite absorbed most water as compared to treated PLA biocomposite with SCCO2 at 5.1%. This is due to the hydrophilic nature of the fibre that absorbed water molecules. Soil burial test showed that the treated PLA biocomposite possessed the highest value of weight losses after 80 days with 97.8%. Biocomposite with the presence of CEO demonstrated antimicrobial activity against both gram-positive and gram-negative bacteria. This showed that SCCO2 significantly improved the properties of PLA biocomposite films. The supercritical fluid treatment of PLA biocomposite could be an alternative for active packaging industries to ensure that the packaging product meets the requirement by consumers as well as being an eco-friendly product. ABSTRAK: Produk biopolimer yang biodegradasi pada masa ini menarik perhatian dari penyelidik dan industri. Pembungkusan biodegradasi berasaskan polilaktik asid (PLA), serat kulit durian (DSF), minyak kelapa sawit terepoksi (EPO) dan ditambah dengan minyak pati kayu manis (CEO) sebagai agen antimikrobial telah dibangunkan dan menjadi bidang penyelidikan. Artikel ini melaporkan kesan karbon dioksida superkritikal terhadap sifat-sifat degradasi dan antimikrobik dari filem biokomposit PLA yang dihasilkan melalui pemutus pelarut. Biokomposit telah menjalani rawatan superkritikal karbon dioksida (SCCO2) pada dua keadaan yang berbeza di bawah suhu 40 °C pada 100 bar dan 200 tekanan bar. Ujian penyerapan air menunjukkan bahawa biocomposite PLA yang tidak dirawat menyerap kebanyakan air berbanding komposisi lain dengan 5.1%. Ini disebabkan sifat hidrofilik serat yang menyerap molekul air. Ujian penanaman dalam tanah menunjukkan bahawa biocomposite PLA yang dirawat mempunyai nilai kehilangan berat tertinggi setelah 80 hari dengan 97.8%. Biokomposit dengan kehadiran CEO menunjukkan aktiviti antimikrobial terhadap bakteria gram-positif dan gram-negatif. Ini menunjukkan bahawa SCCO2 meningkatkan sifat-sifat filem biocomposite PLA. Rawatan cecair superkritikal PLA biocomposite boleh menjadi alternatif bagi industri pembungkusan untuk memastikan produk pembungkusan memenuhi keperluan pengguna serta menjadi produk mesra alam.

To come up with a biodegradable alternative in reducing the use of polymer-based materials, polypropylene (PP) and durian skin nanofibre (DSNF) were melt-blended in a Haake internal mixer before compression moulded into composite specimens. The composites were exposed under ultraviolet (UV) radiation to simulate the effect of sunlight. The significant effect of maleic anhydride polypropylene (MAPP) was observed by the improvement recorded in tensile properties and reduction of water absorption in PP/DSNF composite. The colour index of composites increased with UV radiation exposure. Transmission electron microscope (TEM) images showed DSNF was well-dispersed in PP matrix in the presence of MAPP.