Natural and synthetic fibres have emerged in high demand due to their excellent properties. Natural fibres have good mechanical properties and are less expensive, making them a viable substitute for synthetic fibers. Owing to certain drawbacks such as their inconsistent quality and hydrophilic nature, researchers focused on incorporating these two fibres as an alternative to improve the limitations of the single fibre. This review focused on the interply hybridisation of natural and synthetic fibres into composites. Natural fibres and their classifications are discussed. The physical and mechanical properties of these hybrid composites have also been included. A full discussion of the mechanical properties of natural/synthetic fibre hybrid composites such as tensile, flexural, impact, and perforation resistance, as well as their failure modes, is highlighted. Furthermore, the applications and future directions of hybrid composites have been described in details.
Natural and synthetic fibres are in high demand due to their superior properties. Natural fibres are less expensive and lighter as compared to synthetic fibres. Synthetic fibres have drawn much attention, especially for their outstanding properties, such as durability, and stability. The hybridisation between natural and synthetic fibres composite are considered as an alternative to improve the current properties of natural and synthetic fibres. Therefore, this study aimed to determine the physical and mechanical properties of pineapple leaf fibre (PALF) and Kevlar reinforced unsaturated polyester (UP) hybrid composites. The PALF/Kevlar hybrid composites were fabricated by using hand layup method utilising unsaturated polyester as the matrix. These composites were laid up to various laminated configurations, such as [PKP]s, [PPK]s, [KPP]s, [KKP]s, [PPP]s and [KKK]s, whereby PALF denoted as P and Kevlar denoted as K. Next, they were cut into size and dimensions according to standards. Initially, the density of PALF/Kevlar reinforced unsaturated polyester were evaluated. The highest density result was obtained from [KKK]s, however, the density of hybrid composites was closely indistinguishable. Next, moisture absorption behaviour and its effects on the PALF/Kevlar reinforced unsaturated polyester were investigated. The water absorption studies showed that the hybridisation between all PALF and Kevlar specimens absorbed moisture drastically at the beginning of the moisture absorption test and the percentage of moisture uptake increased with the volume fraction of PALF in the samples. The tensile test indicated that all specimens exhibited nonlinear stress-strain behaviour and shown a pseudo-ductility behaviour. [KKP]s and [KPK]s hybrid composites showed the highest tensile strength and modulus. The flexural test showed that [KPK]s had the highest flexural strength of 164.0 MPa and [KKP]s had the highest flexural modulus of 12.6 GPa. In terms of the impact strength and resistance, [KKP]s outperformed the composite laminates. According to SEM scans, the hybrid composites demonstrated a stronger interfacial adhesion between the fibres and matrix than pure PALF composite.
Construction activities generate construction noise may cause noise annoyance among the public residents. The aim of this study is to investigate the noise annoyance level due to the sound pressure levels and the distances from the construction sites. Three public resident areas around Johor which located near to the construction sites have been selected. Two important indicators such as sound pressure levels and distances between the receiver and the noise sources were measured. 42 questionnaires were randomly distributed to the public residents who live near to the construction sites. The results showed that all respondent have different annoyance levels due to the construction noise. The sound pressure levels received by the public residents are increasing with the decreasing of the distance between the receiver and the noise sources. Thus, the relationship of noise annoyance levels is directly proportional to the sound pressure levels produced from construction sites. Meanwhile, the noise annoyance levels are decreasing with the increasing of the distances. As a conclusion, the public residents who live nearer to the construction sites suffered from a high noise annoyance level as expected.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.