Noise mitigation by means of the acoustic black hole (ABH) effect is a well-known engineering solution. However, the conventional method of applying ABH effect which requires modification of the structure geometry has various limitations which encourage the research of virtual ABH concept. In this study, the effect of ABH was applied through introducing virtual stiffness by a shunt circuit. According to the force-voltage electric analogy, stiffness has an inverse relationship with capacitance. So that the ABH effect can be virtually realized by following a power law profile using an array of independent capacitive shunts. The concept is studied through finite element simulation developing a macro code in ANSYS Parametric Design Language (APDL). To evaluate the influence of capacitance profile on the acoustic radiated power, parametric studies are conducted. Based on the results of the parametric studies, the capacitance profile is tuned for minimum radiated power. It is revealed that the virtual acoustic black hole (ABH) effect can offer 10.29%, 6.37%, and 7.47% reduction in the radiated power from the first to the last targeted mode, respectively. The virtual ABH effect introduced in this study can be used for semi-active structural noise isolation without any weight or manufacturing penalty.
Well-developed Additive Manufacturing leads to a variety of material and structure design. With the combination of 3D printing and plating technique, metal-coated resin lattice is investigated to achieve a light weight design with minimal economic cost and admirable material properties. In this paper, numerical approaches integrated with classical homogenization theory is adopted to study the effective mechanical characterizations of the BCC (Body-Centered-Cubic) metal-coated lattices. The selection of RVE (Representative Volume Element) is discussed for obtaining objective effective properties. Moreover, the impact of unit cell rod diameter and coating film thickness are investigated. A sensitivity analysis of these two parameters is conducted based on the advanced hypercube sampling methods. The results reveal that multiple-unit-cells lead to more stable homogenized properties than single unit cell. The Increase of volume fraction may improve the elastic modulus and specific modulus remarkably. However, the increase of thickness of coating film only leads to monotonously increased elastic modulus. For this reason, there exists an optimal coating film thickness for the specific modulus of the lattice structure.
Nano reinforcement of metals cannot escape the attention of designers who seek to improve overall performance of engineering structures from automotive components to biomedical devices. Since many engineering structures are susceptible to variable cyclic load, presenting shakedown design of them is of the present research interest. So that, in the present research the shakedown loading capacity of metal based nanocomposite is estimated through finite element discretization and interior point optimization method. Finally, the results are obtained for plate structures subjected to two independent biaxial loads. A maximum improvement of 71.2% is achieved for shakedown load factor of the structure, which means a remarkable improvement in load bearing capacity of the structure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.