Drilling in depleted reservoirs has many challenges due to the overbalance pressure. Another trouble associated with overbalance drilling is differential sticking and formation damage. Low-density drilling fluid is an advanced method for drilling these depleted reservoirs and pay zones with different pressures to balance the formation pore pressure and hydrostatic drilling fluid pressure. This study investigated the infiltration of a micro-bubble fluid as an underbalanced drilling method in fractured reservoirs. A novel method has been presented for drilling permeable formations and depleted reservoirs, leading to an impressive reduction in costs, high-tech facilities, and drilling mud invasion. It also reduces mud loss, formation damages, and skin effects during the drilling operation. This paper studied micro-bubble fluid infiltration in a single fracture, and a synthetic metal plug investigated the bridging phenomenon through the fractured medium. Moreover, the effects of fracture size, bubble size, and a pressure differential of fracture ends have been thoroughly analyzed, considering the polymer and surfactant concentrations at reservoir conditions, including the temperature and overburden pressure. In this study, nine experimental tests were designed using the design of experiment, Taguchi method. The results indicated that higher micro-bubble fluid mixing speed values make smaller bubbles with lower blocking ability in fracture (decrease the chance of blocking more than two times). On the other hand, a smaller fracture width increases the probability of bubble bridges in the fracture but is not as crucial as bubble size. As a result, drilling fluid infiltration in fractures and formation damages decreases in the condition of overbalanced drilling pressure differences of about 200 psi.
The colloidal gas Aphron (CGA) drilling fluids are an alternative to ordinary drilling mud to minimize formation damage by blocking rock pores with microbubbles in low-pressure or depleted reservoirs. Fractured formations usually have different characteristics and behavior in contrast to conventional ones and need to be investigated for Aphron applications. In this research, a series of core flood tests were conducted to understand the factors controlling the pore-blocking mechanisms of microbubbles in fractured formations. For the first time, a synthetic metal plug was used to simulate the fracture walls and eliminate the formation matrix effect. This study analyzed the effects of three fluid compositions, considering the polymer and surfactant concentrations at reservoir conditions, including temperature and overburden pressure. Additionally, fracture surface roughness as one of the parameters affecting the microbubble fluid penetration through the fracture path and bubble blockage were studied. The results indicated that microbubble fluid composition would not affect the bubble size or blockage probability. The different stable microbubble fluids resulted in the same pattern and conditions. Besides, fluid penetration would be more challenging if the fracture roughness decreased. Due to the accumulation of bubbles and the fact that some of them were trapped in the fracture’s rough surface, the blockage possibility increased. According to the range of roughness for the steel core in previous studies and compared with the roughness of carbonate reservoir rocks, the roughness of fractured reservoir rocks is much higher than that of the steel surface. Accordingly, the observed trend in the experiments showed that when it is possible to form a bubble bridge in steel cores, then in carbonate rocks, we will definitely see blockage with any roughness, provided that other parameters are acceptable.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.