Laser-Induced Localized Growth of Methylammonium Lead Halide Perovskite Nano-and Microcrystals on SubstratesStable MAPbBr 3 crystals with different sizes are successfully localized on a flat substrate via laser-induced heating of the liquid precursors. By adjusting the infrared laser parameters, luminescent arrays and photoconductive wires are grown on-site. This technique can be used to guide the writing of other patterns for specific functionalities.
Fluorescence microscopy and derived techniques are continuously looking for photodetectors able to guarantee increased sensitivity, high spatial and temporal resolution and ease of integration into modern microscopy architectures. Recent advances in single-photon avalanche diodes (SPADs) fabricated with industry-standard microelectronic processes allow the development of new detection systems tailored to address the requirements of advanced imaging techniques (such as image-scanning microscopy). To this aim, we present the complete design and characterization of two bidimensional SPAD arrays composed of 25 fully independent and asynchronously-operated pixels, both having fill-factor of about 50% and specifically designed for being integrated into existing laser scanning microscopes. We used two different microelectronics technologies to fabricate our detectors: the first technology exhibiting very low noise (roughly 200 dark counts per second at room temperature), and the second one showing enhanced detection efficiency (more than 60% at a wavelength of 500 nm). Starting from the silicon-level device structures and moving towards the in-pixel and readout electronics description, we present performance assessments and comparisons between the two detectors. Images of a biological sample acquired after their integration into our custom imagescanning microscope finally demonstrate their exquisite on-field performance in terms of spatial resolution and contrast enhancement. We envisage that this work can trigger the development of a new class of SPAD-based detector arrays able to substitute the typical singleelement sensor used in fluorescence laser scanning microscopy.
We report a laser-based approach for the fast fabrication of high-optical-quality polymeric microlenses and microlens arrays with controllable geometry and size. Our strategy consists of the direct laser printing of microdroplets of a highly viscous UV prepolymer at targeted positions, followed by photocuring. We study the morphological characteristics and imaging performance of the microlenses as a function of the substrate and laser parameters and investigate optimal printing conditions and printing mechanisms. We show that the microlens size and focusing properties can be easily tuned by the laser pulse energy, with minimum volumes below 20 fL and focal lengths ranging from 7 to 50 μm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.