REGULUS is an Iodine-based electric propulsion system. It has been designed and manufactured at the Italian company Technology for Propulsion and Innovation SpA (T4i). REGULUS integrates the Magnetically Enhanced Plasma Thruster (MEPT) and its subsystems, namely electronics, fluidic, and thermo-structural in a volume of 1.5 U. The mass envelope is 2.5 kg, including propellant. REGULUS targets CubeSat platforms larger than 6 U and CubeSat carriers. A thrust T = 0.60 mN and a specific impulse Isp = 600 s are achieved with an input power of P = 50 W; the nominal total impulse is Itot = 3000 Ns. REGULUS has been integrated on-board of the UniSat-7 satellite and its In-orbit Demonstration (IoD) is currently ongoing. The principal topics addressed in this work are: (i) design of REGULUS, (ii) comparison of the propulsive performance obtained operating the MEPT with different propellants, namely Xenon and Iodine, (iii) qualification and acceptance tests, (iv) plume analysis, (v) the IoD.

A self-consistent model is presented for performing steady-state fully kinetic Particle-in-Cell simulations of magnetised plasma plumes. An energy-based electron reflection prevents the numerical pump instability associated with a typical open-outflow boundary, and is shown to be sufficiently general that both the plume kinetics and plasma potential demonstrate domain independence (within 4\%). This is upheld by non-stationary Robin-type boundary conditions on the Poisson's equation, coupled to a capacitive circuit that allows physical evolution of the downstream potential drop in the transient. The method has been validated against experiments, providing results that fall within the uncertainty of measurements. Simulations are then carried out to study collisional xenon discharges into axisymmetric diverging magnetic nozzles. Particular discussion is given to the identification of a collision-enhanced potential well arising from charge separation at the plume periphery, the role of ion-neutral charge exchange, and a three-region piecewise polytropic cooling regime for electrons. The polytropic index is shown to depend on the degree of magnetisation. Specifically, in the region near the thruster outlet, the plume is weakly-magnetised due to the cross-field diffusion of electron-heavy particle collisions. Downstream, a strongly-magnetised region of near-isothermal expansion occurs. Finally, in the detached region, the polytropic index tends to that of a more adiabatic unmagnetised case. With an increasing magnetic nozzle field strength, an inferior limit is found to the average polytropic index of γe ∼ 1.16.

A three-dimensional fully kinetic particle-in-cell (PIC) simulation strategy has been implemented to simulate the acceleration stage of a magnetically enhanced plasma thruster (MEPT). The study has been performed with the open-source code Spacecraft Plasma Interaction Software (SPIS). The tool has been copiously modified to simulate properly the dynamics of a magnetized plasma plume. A cross-validation of the methodology has been done with Starfish, a two-dimensional open-source PIC software. Two configurations have been compared: (i) in the absence of a magnetic field and (ii) in the presence of a magnetic field generated by a coil with maximum intensity of 300 G at the thruster outlet. The results show a reduction of the plume divergence angle, an increase of ion speed and an increase of the specific impulse in the presence of the magnetic nozzle. The simulations presented in this study are representative of the operative conditions of a 50 W MEPT. Nonetheless, the methodology adopted can be extended to handle the magnetized plasma plume of several other types of thrusters such as electron cyclotron resonance and applied field magnetoplasmadynamic thrusters.

No abstract

No abstract

No abstract