[1] We investigate how existing veins interact with extension fractures in rocks using 3-D Discrete Element Method models with a geometry inspired by tension tests with notched samples. In a sensitivity study, we varied (a) the angle between the vein and the bulk extension direction and (b) the strength ratio between host rock and vein material. Results show a range of vein-fracture interactions, which fall into different, robust, "structural styles." Veins, which are weaker than the host rock, tend to localize fracturing into the vein, even at high-misorientation angles. Veins, which are stronger than the host rock, cause deflection of the fracture tip along the vein-host rock interface. Fractures are arrested at the interface from weak to stronger material. When propagating from a stronger to a weaker material, macroscopic bifurcation of the fracture is common. Complex interactions are favored by a low angle between the vein and the fracture and by high-strength contrast. The structural styles in the models show good agreement with microstructures and mesostructures of crack-seal veins found in natural systems. We propose that these structural styles form the basis for criteria to recognize strength contrasts and stress of crack-seal systems in nature.Citation: Virgo, S., S. Abe, and J. L. Urai (2013), Extension fracture propagation in rocks with veins: Insight into the crack-seal process using Discrete Element Method modeling,

The structural evolution of the carbonate platform in the footwall of the Semail ophiolite emplaced onto the passive continental margin of Arabia helps to better understand the early stages of obduction‐related orogens. These early stages are rarely observable in other orogens as they are mostly overprinted by later mountain building phases. We present an extensive structural analysis of the Jebel Akhdar anticline, the largest tectonic window of the Oman Mountains, and integrate it on different scales. Outcrop observations can be linked to plate motion data, providing an absolute timeframe for structural generations consistent with radiometric dating of veins. Top‐to‐S overthrusting of the Semail ophiolite and Hawasina nappes onto the carbonate platform during high plate convergence rates between Arabia and Eurasia caused rapid burial and overpressure, generation and migration of hydrocarbons, and bedding‐confined veins, but no major deformation in the carbonate platform. At reduced convergence rates, subsequent tectonic thinning of the ophiolite took place above a top‐to‐NNE, crustal‐scale ductile shear zone, deforming existing veins and forming a cleavage in clay‐rich layers in early Campanian times. Ongoing extension occurred along normal‐ to oblique‐slip faults, forming horst‐graben structures and a precursor of the Jebel Akhdar dome (Campanian to Maastrichtian). This was followed by NE‐SW oriented ductile shortening and the formation of the Jebel Akhdar dome, deforming the earlier structures. Thereafter, exhumation was associated with low‐angle normal faults on the northern flank of the anticline. We correlate the top‐to‐NNE crustal‐scale shear zone with a similar structure in the Saih Hatat window to develop a unified model of the tectonic evolution of the Oman Mountains.

ABSTRACT. The Mesozoic succession of the Jabal Akhdar dome in the Oman

Veins are ubiquitous in upper and middle crustal rocks. Due to strength and stiffness contrast to the host rock, veins can influence crack propagation. Here we present Discrete Element Models to investigate crack-vein interactions by simulating cycles of fracturing of a rock mass, sealing the cracks to form veins, and refracturing the rock mass after rotating the stress field. We observe different styles of interaction between new fractures and existing veins, depending on the strength ratio between vein and host rock and on the changes in the stress field between the different deformation stages. If the orientation of stress field does not change between deformation stages, ataxial crack seal veins are produced if the veins are weak and a bundle of subparallel microveins if the veins are strong. If the stress field is rotated between deformation stages, the interactions include reactivation, fracture deflection, and crosscutting. Reactivation of weak veins occurs even if the vein orientation is highly unfavorable relative to the stress field. Relays of fractures between reactivated veins form at a higher angle to the veins than expected. This demonstrates that the orientation of secondary veins does not reflect the regional stress field in a simple manner and that veins can strongly influence fracture connectivity, with implications for paleostress analysis and basin modeling. Simulation results compare well with field examples of multiphase vein networks in carbonates from Jebel Akhdar, Oman.

Abstract. In multiply deformed terrains multiphase boudinage is common, but identification and analysis of these is difficult. Here we present an analysis of multiphase boudinage and fold structures in deformed amphibolite layers in marble from the migmatitic centre of the Naxos metamorphic core complex. Overprinting between multiple boudinage generations is shown in exceptional 3-D outcrop. We identify five generations of boudinage, reflecting the transition from high-strain high-temperature ductile deformation to medium-to low-strain brittle boudins formed during cooling and exhumation. All boudin generations indicate E-W horizontal shortening and variable direction of bedding parallel extension, evolving from subvertical extension in the earliest boudins to subhorizontal N-S extension during exhumation. Two phases of E-W shortening can be inferred, the first associated with lower crustal synmigmatic convergent flow and the second associated with exhumation and N-S extension, possibly related to movement of the North Anatolian Fault.

We present a structural, microstructural, and stable isotope study of a calcite vein mesh within the Cretaceous Natih Formation in the Oman Mountains to explore changes in fluid pathways during vein formation. Stage 1 veins form a mesh of steeply dipping crack‐seal extension veins confined to a 3.5‐m‐thick stratigraphic interval. Different strike orientations of Stage 1 veins show mutually crosscutting relationships. Stage 2 veins occur in the dilatant parts of a younger normal fault interpreted to penetrate the stratigraphy below. The δ18O composition of the host rock ranges from 21.8‰ to 23.7‰. The δ13C composition ranges from 1.5‰ to 2.3‰. This range is consistent with regionally developed diagenetic alteration at top of the Natih Formation. The δ18O composition of vein calcite varies from 22.5‰ to 26.2‰, whereas δ13C composition ranges from −0.8‰ to 2.1‰. A first trend observed in Stage 1 veins involves a decrease of δ13C to compositions nearly 1.3‰ lower than the host rock, whereas δ18O remains constant. A second trend observed in Stage 2 calcite has δ18O values up to 3.3‰ higher than the host rock, whereas the δ13C composition is similar. Stable isotope data and microstructures indicate an episodic flow regime for both stages. During Stage 1, formation of a stratabound vein mesh involved bedding‐parallel flow, under near‐lithostatic fluid pressures. The 18O fluid composition was host rock‐buffered, whereas 13C composition was relatively depleted. This may reflect reaction of low 13C CO2 derived by fluid interaction with organic matter in the limestones. Stage 2 vein formation is associated with fault‐controlled fluid flow accessing fluids in equilibrium with limestones about 50 m beneath. We highlight how evolution of effective stress states and the growth of faults influence the hydraulic connectivity in fracture networks and we demonstrate the value of stable isotopes in tracking changes in fluid pathways.

No abstract

No abstract