Innovative applications based on two-dimensional solids require cost-effective fabrication processes resulting in large areas of high quality materials. Chemical vapour deposition is among the most promising methods to fulfill these requirements. However, for 2D materials prepared in this way it is generally assumed that they are of inferior quality in comparison to the exfoliated 2D materials commonly used in basic research. In this work we challenge this assumption and aim to quantify the differences in quality for the prototypical transition metal dichalcogenide MoS2. To this end single layers of MoS2 prepared by different techniques (exfoliation, grown by different chemical vapour deposition methods, transfer techniques and as vertical heterostructure with graphene) are studied by Raman and photoluminescence spectroscopy, complemented by atomic force microscopy. We demonstrate that as-prepared MoS2, directly grown on SiO2, differs from exfoliated MoS2 in terms of higher photoluminescence, lower electron concentration and increased strain. As soon as a water film is intercalated (e.g. by transfer) underneath the grown MoS2, in particular the (opto)electronic properties become practically identical to those of exfoliated MoS2. A comparison of the two most common precursors shows that the growth with MoO3 causes greater strain and/or defect density deviations than growth with ammonium heptamolybdate. As part of a heterostructure directly grown MoS2 interacts much stronger with the substrate and in this case an intercalated water film does not lead to the complete decoupling, which is typical for exfoliation or transfer. Our work shows that the supposedly poorer quality of grown 2D transition metal dichalcogenides is indeed a misconception.
Despite outstanding accomplishments in catalyst discovery, finding new, more efficient, environmentally neutral, and noble metal-free catalysts remains challenging and unsolved. Recently, complex solid solutions consisting of at least five different elements and often named as high-entropy alloys have emerged as a new class of electrocatalysts for a variety of reactions. The multicomponent combinations of elements facilitate tuning of active sites and catalytic properties. Predicting optimal catalyst composition remains difficult, making testing of a very high number of them indispensable. We present the high-throughput screening of the electrochemical activity of thin film material libraries prepared by combinatorial co-sputtering of metals which are commonly used in catalysis (Pd, Cu, Ni) combined with metals which are not commonly used in catalysis (Ti, Hf, Zr). Introducing unusual elements in the search space allows discovery of catalytic activity for hitherto unknown compositions. Material libraries with very similar composition spreads can show different activities vs. composition trends for different reactions. In order to address the inherent challenge of the huge combinatorial material space and the inability to predict active electrocatalyst compositions, we developed a high-throughput process based on co-sputtered material libraries, and performed high-throughput characterization using energy dispersive X-ray spectroscopy (EDS), scanning transmission electron microscopy (SEM), X-ray diffraction (XRD) and conductivity measurements followed by electrochemical screening by means of a scanning droplet cell. The results show surprising material compositions with increased activity for the oxygen reduction reaction and the hydrogen evolution reaction. Such data are important input data for future data-driven materials prediction.
Complex solid solutions (“high entropy alloys” with a single solid‐solution phase) hold great promise in electrocatalysis because of their nearly unlimited number of different active sites exposed at the surface. It has been shown by theoretical studies that multiple arrangements of different elements directly neighboring a binding site create millions of differently active catalytic sites. We report a zooming‐in approach using scanning electrochemical cell microscopy (SECCM) to distinguish between the averaged electrochemical response of multiple active sites and active site‐specific electrochemical response. Using a thin film complex solid solution electrocatalyst and a range of SECCM single barrel capillaries with diameters from 1.2 µm to 50 nm, we observed an averaged electrochemical response for the oxygen reduction reaction with minor statistical variations for the larger capillary diameters. In contrast, significant statistical heterogeneity among the measured spots is observed for small capillary diameters. This statistical heterogeneity is attributed to the ability of the smaller probe size to address a comparatively smaller number of active sites with high or low activity dominating the measured electrocatalytic currents.
Discovery of new electrocatalysts requires the combination of high-throughput synthesis and high-throughput screening techniques to explore the vast compositional range of compositionally complex solid solutions (CCSS). This work explores more...
The electrocatalytic activity for the oxygen evolution reaction in alkaline electrolyte of hexagonal spinel Co3O4 nanoparticles derived using scanning electrochemical cell microscopy (SECCM) is correlated with scanning electron microscopy and atomic force microscopy images of the droplet landing sites. A unique way to deconvolute the intrinsic catalytic activity of individual crystal facets of the hexagonal Co3O4 spinel particle is demonstrated in terms of the turnover frequency (TOF) of surface Co atoms. The top surface exposing 111 crystal planes displayed a thickness‐dependent TOF with a TOF of about 100 s−1 at a potential of 1.8 V vs. RHE and a particle thickness of 100 nm. The edge of the particle exposing (110) planes, however, showed an average TOF of 270±68 s−1 at 1.8 V vs. RHE and no correlation with particle thickness. The higher atomic density of Co atoms on the edge surface (2.5 times of the top) renders the overall catalytic activity of the edge planes significantly higher than that of the top planes. The use of a free‐diffusing Os complex in the alkaline electrolyte revealed the low electrical conductivity through individual particles, which explains the thickness‐dependent TOF of the top planes and could be a reason for the low activity of the top (111) planes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.