Telah dilakukan penelitian untuk mengidentifikasi lapisan batuan andesit menggunakan metode geolistrik 2D dengan konfigurasi Schlumberger di daerah Pengaron, Kalimantan Selatan. Pengukuran dilakukan untuk lima lintasan dengan panjang tiap lintasan 270 m. Tujuan dari penelitian ini adalah memodelkan penampang lintang nilai resistivitas 2D, menentukan jenis litologi, kedalaman dan ketebalan batuan andesit di daerah penelitian. Berdasarkan hasil pengolahan data diperoleh tiga lapis jenis batuan. Lapisan pertama merupakan lapisan top soil dengan nilai resistivitas 39–116 Ωm, lapisan kedua adalah lempung dengan nilai resistivitas 143–298 Ωm dan lapisan ketiga merupakan batuan andesit dengan nilai resistivitas 320–1.000 Ωm. Hasil interpretasi 2D menunjukkan bahwa batuan andesit memiliki nilai resistivitas 382–1.000 Ωm pada kedalaman 10-77 m dan ketebalan 10–55 m. Research has been carried out to identify andesite rock layers using 2D geo-electrical method with Schlumberger configuration in the Pengaron area, South Kalimantan. Measurements were made for five tracks with a length of each track being 270 m. The purpose of this research is to model the cross section of 2D resistivity values, determine the type of lithology, depth and thickness of andesite rocks in the study area. Based on the results of data processing, three layers of rock types were obtained. The first layer is the top soil layer with a resistivity value of 39–116 Ωm, the second layer is clay with a resistivity value of 143–298 Ωm and the third layer is andesite rock with a resistivity value of 320–1,000 Ωm. The 2D interpretation results show that andesite rocks have a resistivity value of 382–1,000 Ωm at a depth of 10-77 m and a thickness of 10–55 m.
Chemical modifications for waste oil palm trunks had carried out as acoustic material. This modification was conducted in two stages. Firstly, formalization with formaldehyde solution and secondly is impregnation with melamine-formaldehyde resin. Formalization was conducted in alkaline condition (pH 10) for 3 days and 5 days. Impregnation was carried out under pressure 3 bar and 5 bar and held for an hour. For completed these modification, the samples was cured at 120oC for 10 minutes and then dried at (103±2)oC to reached moisture content of less than 6%. This modification has changed the chemical structure and the morphology of wood, as shown by the FTIR and SEM results. The samples became denser, stronger and more rigid. Furthermore, the mechanical and physical properties of modified wood are also increasing. The absorption coefficient decreases with increasing formalization time and impregnation pressure. Based on trend of absorption coefficient, BKS wood can be applicated as resonant absorber with work class from A to class B and D.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.