Gusset plate connections to the ends of hollow structural section (HSS) members are regularly used in steel-framed buildings and roof trusses. Recent research on this connection type has indicated that current design recommendations for preventing tensile failure induced by shear lag may be overly conservative. This paper presents an experimental study on 13 gusset plate end connections to circular and elliptical HSS members under quasi-static tension and compression loadings. Current design proposals found in research studies and in design guides and specifications are compared with the experimental work. Various fabrication details for this connection type have been considered, and the influence of connection length, gusset plate orientation (in the tube long side versus short side), and distance between welds has been studied. In the experimental study, failure of all specimens under tensile loading was caused by circumferential fracture of the HSS or by tear-out of the HSS base material along the weld. The compression specimens failed by local buckling of the HSS at the connection end. A preferred static design approach for such connections is thus recommended.Résumé : Les raccordements par plaques gousset aux extrémités de sections structurelles creuses (HSS -hollow structural section) sont fréquemment utilisés dans les bâtiments à charpente métallique et les fermes de toits. La recherche récente sur ce type de raccordement a montré que les recommandations de conception actuelles pourraient être trop conservatrices par rapport à la rupture en traction causée par un retard de cisaillement. Cet article présente une étude expérimentale effectuée sur 13 raccordements d'extrémité avec plaques gousset sur des membrures HSS circulaires et elliptiques sous des charges quasi statiques en tension et en compression. Les suggestions actuelles de conception trouvées dans les recherches, les guides de conception et les devis sont comparées au travail expérimental. Divers détails de fabrication de ce type de raccordement ont été pris en compte et l'influence de la longueur du raccordement, de l'orientation de la plaque gousset (dans le long côté du tube par rapport au côté court) ainsi que la distance entre les soudures a été examinée. Dans cette étude expérimentale, la rupture de tous les échantillons en tension a été causée soit par une fracture circonférentielle de la HSS ou soit par un arrachement du matériel à la base de la HSS le long de la soudure. Les échantillons en compression ont rompu par flambement local de la HSS à l'extrémité de raccordement. Une approche préférentielle de dimensionnement statique est recommandée pour de tels raccordements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.