Freestanding, binder-free supercapacitor electrodes based on high-purity polyaniline (PANI) nanofibers were fabricated via a single step electrospinning process. The successful electrospinning of nanofibers with an unprecedentedly high composition of PANI (93 wt %) was made possible due to blending ultrahigh molecular weight poly(ethylene oxide) (PEO) with PANI in solution to impart adequate chain entanglements, a critical requirement for electrospinning. To further enhance the conductivity and stability of the electrodes, a small concentration of carbon nanotubes (CNTs) was added to the PANI/PEO solution prior to electrospinning to generate PANI/CNT/PEO nanofibers (12 wt % CNTs). Scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) porosimetry were conducted to characterize the external morphology of the nanofibers. The electrospun nanofibers were further probed by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The electroactivity of the freestanding PANI and PANI/CNT nanofiber electrodes was examined using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. Competitive specific capacitances of 308 and 385 F g(-1) were achieved for PANI and PANI-CNT based electrodes, respectively, at a current density of 0.5 A g(-1). Moreover, specific capacitance retentions of 70 and 81.4% were observed for PANI and PANI-CNT based electrodes, respectively, after 1000 cycles. The promising electrochemical performance of the fabricated electrodes, we believe, stems from the porous 3-D electrode structure characteristic of the nonwoven interconnected nanostructures. The interconnected nanofiber network facilitates efficient electron conduction while the inter- and intrafiber porosity enable excellent electrolyte penetration within the polymer matrix, allowing fast ion transport to the active sites.

Two inorganic-organic hybrid clusters with one or two covalently linked pyrene fluorescent probes, [(n-C(4)H(9))(4)N](2)[V(6)O(13){(OCH(2))(3)C(NH(CO)CH(2)CH(2)CH(2)C(16)H(9))}{(OCH(2))(3)C-(NH(2))}] ((TBA(+))(2)1) and [(n-C(4)H(9))(4)N](2)[V(6)O(13){(OCH(2))(3)C(NH(CO)CH(2)CH(2)CH(2)C(16)H(9))}(2)] ((TBA(+))(2)2), respectively, are synthesized from Lindqvist type polyoxometalates (POMs). The incorporation of pyrene into POMs results in amphiphilic hybrid molecules and simultaneously offers a great opportunity to study the interaction between hybrid clusters and their counterions. 2D-NOESY NMR and fluorescence techniques have been used to study the role of counterions such as tetrabutyl ammonium (TBA) in the vesicle formation of the hybrid clusters. The TBA(+) ions not only screen the electrostatic repulsions between the POM head groups but also are involved in the hydrophobic region of the vesicular structure where they interrupt the formation of pyrene excimers that greatly perturbs the luminescence signal from the vesicle solution. By replacing the TBA(+) counterions with protons, the new vesicles demonstrate interesting pH-dependent fluorescence properties.

A high-performance, self-standing solid-state supercapacitor is prepared by incorporating an ionic liquid (IL)-rich ionogel made with 95 wt % IL (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and 5 wt % methyl cellulose, a polymer matrix, into highly interconnected 3-D activated carbon nanofiber (CNF) electrodes. The ionogel exhibits strong mechanical properties with a storage modulus of 5 MPa and a high ionic conductivity of 5.7 mS cm at 25 °C. The high-surface-area CNF-based electrode (2282 m g), obtained via an electrospinning technique, exhibits hierarchical porosity generated both in situ during pyrolysis and ex situ via KOH activation. The porous architecture of the CNF electrodes facilitates the facile percolation of the soft but mechanically durable ionogel film, thereby enabling intimate contact between porous nanofibers and the gel electrolyte interface. The supercapacitor demonstrates promising capacitive characteristics, including a gravimetric capacitance of 153 F g, a high specific energy density of 65 W h kg, and high cycling stability, with a capacitance fade of only 4% after 20 000 charge-discharge cycles at 1 A g. Moreover, device-level areal capacitances for the gel IL cell of 122 and 151 mF cm are observed at electrode mass loadings of 3.20 and 5.10 mg cm, respectively.

No abstract

Iron oxides are promising materials for application in supercapacitors owing to their high theoretical redox capacitance (2299 F g À1 ). Nevertheless, iron oxide nanostructures experience constant stress during cycling due to repeated expansion and contraction resulting in structural degradation. Such structural instability makes it challenging to develop freestanding and binderfree iron oxide-based electrodes with superior electrochemical performance. In this work, the authors report a facile way to fabricate iron-based carbon nanofibers using a simple and fast technique of electrospinning followed by an in situ electrochemical conversion. The final composite electrode consists of iron oxide embedded in carbon nanofibers which possesses a robust contact and support in addition to freestanding and binder-free nature. The electrodes exhibit a capacitance of 460 F g À1 at a galvanostatic discharge current density of 1 A g À1 and retains $82% of its capacitance after 5000 cycles in a wide negative potential window of 1.3 V. Extensive spectroscopic investigation is conducted to monitor phase transformation of the electrodes during oxidation and reduction to provide a understanding of the redox mechanism during electrochemical cycling.