The fluorescence of metal nanoclusters provides an amusing optic feature to be applied in various fields. However, rational design of dual functional fluorescent metal nanoclusters directed by active enzyme with targeted application remains little explored. In this work, we report a new strategy to construct enzyme functionalized fluorescent gold nanoclusters via a biomineralization process for the detection of hydrogen peroxide. Horseradish peroxidase (HRP) was used as a model functional template to direct the synthesis of fluorescent gold nanoclusters (Au NCs) at physiological conditions to form HRP-Au NCs bioconjugates. We found that the fluorescence of HRP-Au NCs can be quenched quantitatively by adding H(2)O(2), indicating that HRP enzyme remains active and enables catalytic reaction of HRP-Au NCs and H(2)O(2). Upon the addition of H(2)O(2) under optimal conditions, the fluorescence intensity quenched linearly over the range of 100 nM to 100 μM with high sensitivity (LOD = 30 nM, S/N = 3). This study would be potentially extended to other functional proteins to generate dual functional nanoclusters and applied to real time monitoring of biologically important targets in living cells.

A new ion source based on dielectric barrier discharge was developed as an alternative ionization source for ambient mass spectrometry. The dielectric barrier discharge ionization source, termed as DBDI herein, was composed of a copper sheet electrode, a discharge electrode, and a piece of glass slide in between as dielectric barrier as well as sample plate. Stable low-temperature plasma was formed between the tip of the discharge electrode and the surface of glass slide when an alternating voltage was applied between the electrodes. Analytes deposited on the surface of the glass slide were desorbed and ionized by the plasma and the ions were introduced to the mass spectrometer for mass analysis. The capability of this new ambient ion source was demonstrated with the analysis of 20 amino acids, which were deposited on the glass slide separately. Protonated molecular ions of [M + H](+) were observed for all the amino acids except for L-arginine. This ion source was also used for a rapid discrimination of L-valine, L-proline, L-serine and L-alanine from their mixture. The limit of detection was 3.5 pmol for L-alanine using single-ion-monitoring (SIM). Relative standard deviation (RSD) was 5.78% for 17.5 nmol of L-alanine (n = 5). With the advantages of small size, simple configuration and ease operation at ambient conditions, the dielectric barrier discharge ion source would potentially be coupled to portable mass spectrometers.

A novel kind of quantum dots, sulfur quantum dots (S dots), is synthesized by simply treating sublimated sulfur powders with alkali using polyethylene glycol-400 as passivation agents. The synthesized S dots exhibit excellent aqueous dispersibility, eminent photostability and temperature dependent photoluminescence (PL). An "assemble-fission" mechanism is proposed for the S dots formation in which "assembling" and "fission" are involved and contest each other. The ultimate morphologies of the S dots are dependent on the balance of the two forces. Guided by the assemble-fission mechanism, weakening the assembling effect is beneficial for obtaining monodisperse S dots, which can be achieved by pretreating of sulfur powder with nitric acid. PL wavelength of the S dots has been successfully tuned between green and blue light (from 550 to 440 nm) by simply controlling reaction time. A satisfactory quantum yield of 3.8% is obtained. Significant electrochemiluminescence of the S dots is observed in an annihilation reaction. Chemiluminescence from the S dots has been observed by direct oxidation. Taking advantage of unique and inherent antimicrobial activity of the sulfur particles, it is believed that this new emerging luminescent nanomaterial is highly promising in the development of new types of optoelectronic devices and tracer for live cells, in vivo imaging and diagnostics.

Molecular analysis at cellular and subcellular levels, whether on selected molecules or at the metabolomics scale, is still a challenge now. Here we propose a method based on probe ESI mass spectrometry (PESI-MS) for single cell analysis. Detection of metabolites at cellular and subcellular levels was successfully achieved. In our work, tungsten probes with a tip diameter of about 1 μm were directly inserted into live cells to enrich metabolites. Then the enriched metabolites were directly desorbed/ionized from the tip of the probe for mass spectrometry (MS) detection. The direct desorption/ionization of the enriched metabolites from the tip of the probe greatly improved the sensitivity by a factor of about 30 fold compared to those methods that eluted the enriched analytes into a liquid phase for subsequent MS detection. We applied the PESI-MS to the detection of metabolites in single Allium cepa cells. Different kinds of metabolites, including 6 fructans, 4 lipids, and 8 flavone derivatives in single cells, have been successfully detected. Significant metabolite diversity was observed among different cells types of A. cepa bulb and different subcellular compartments of the same cell. We found that the inner epidermal cells had about 20 fold more fructans than the outer epidermal cells, while the outer epidermal cells had more lipids. We expected that PESI-MS might be a candidate in the future studies of single cell "omics".

Trace amounts of explosives on solid surfaces were detected by mass spectrometry at ambient conditions with a new technique termed dielectric barrier discharge ionization (DBDI). By the needle-plate discharge mode, a plasma discharge with energetic electrons was generated, which could launch the desorption and ionization of the explosives from solid surfaces. Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT), and pentaerythritol tetranitrate (PETN) were desorbed directly from the explosives-contaminated surface by DBDI, forming the typical anions of [TNT](-), [TNT - H](-), [RDX + NO(2)](-), [PETN + ONO(2)](-), and [RDX + ONO(2)](-). The ions were transferred into the MS instrument for analysis in the negative ion mode. The detection limit of present method was 10 pg for TNT (m/z 197, S/N 8 : 1), 0.1 ng for RDX (m/z 284, S/N 10 : 1), and 1 ng for PETN (m/z 260, S/N 12 : 1). The present method allowed the detection of trace explosives on various matrices, including paper, cloth, chemical fiber, glass, paints, and soil. A relative standard deviation of 5.57% was achieved by depositing 100 pg of TNT on these matrices. The analysis of A-5, a mixture of RDX and additives, has been carried out and the results were consistent with the reference values. The DBDI-MS method represents a simple and rapid way for the detection of explosives with high sensitivity and specificity, which is especially useful when they are present in trace amounts on ordinary environmental surfaces.

In this paper, we have constructed a low temperature plasma (LTP) probe using dielectric barrier discharge (DBD) and employed it for the detection of explosives on a variety of substrates under ambient conditions. Upon discharge, a transient, low-temperature non-equilibrium plasma comprising ions, electrons and metastable atoms are generated between the electrodes. Three common explosives, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-trinitro-1,3,5-triazine (RDX), and pentaerythritol tetranitrate (PETN), were directly desorbed and ionized from solid surfaces, followed by subsequent analysis using the mass spectrometer in the negative ion mode. Limits of detection (LODs) were 500 fg for TNT, 1 pg for RDX, and 500 fg for PETN. The reliability of the method was characterized by a successful analysis of a mixture of the three explosives. The ion source also allowed direct detection of trace explosives on both conductive and non-conductive substrates, thus expanding the applicability of low temperature plasma desorption mass spectrometry.

An optical sensor array based on chemiluminescent images from spots of nanomaterials has been employed to recognize odorous samples. The distinctive images obtained from the array permit identification of a wide range of analytes, even homologous compounds.

Inductively coupled plasma mass spectrometry (ICPMS) has been successfully used for the detection of element-tagged biomolecules with the advantage of multielement capability. However, this technique cannot be used for microarray detection due to the necessity to dissolve the elemental tags before introducing them to the plasma source. Here, we report the detection of multiple proteins on each spot of the immuno-microarray by laser ablation ICPMS. alpha-Fetoprotein IgG (AFP), carcinoembryonic antigen (CEA), and human IgG, as model proteins, have been detected on the basis of sandwich-type immunoreactions on a microarray with Sm3+-labeled AFP antibody, Eu3+-labeled CEA antibody, and Au-labeled goat-anti-human IgG (GAH) as labeled antibodies. The detection limits were 0.20, 0.14, and 0.012 ng mL-1 (3sigma) with the RSD of 5.7%, 2.6%, and 2.3% at the concentration of 1.0 ng mL-1 for AFP, CEA, and human IgG, respectively. The present detection method permits detecting multiple analytes from each spot of microarray with a spatial resolution at micrometer range, which can alleviate the stress to fabricate high-density arrays. Furthermore, the substrate materials and immobilized proteins do not interfere with the detection. The present technique provides a new strategy for readout of microarray.