<span lang="EN-US">In this paper, a low-complexity model is proposed for linearizing power amplifiers with memory effects using the digital predistortion (DPD) technique. In the proposed model, the linear, low-order nonlinear and high-order nonlinear memory effects are computed separately to provide flexibility in controlling the model parameters so that both high performance and low model complexity can be achieved. The performance of the proposed model is assessed based on experimental measurements of a commercial class AB power amplifier by applying a single-carrier wideband code division multiple access (WCDMA) signal. The linearity performance and the model complexity of the proposed model are compared with the memory polynomial (MP) model and the DPD with single-feedback model. The experimental results show that the proposed model outperforms the latter model by 5 dB in terms of adjacent channel leakage power ratio (ACLR) with comparable complexity. Compared to MP model, the proposed model shows improved ACLR performance by 10.8 dB with a reduction in the complexity by 17% in terms of number of floating-point operations (FLOPs) and 18% in terms of number of model coefficients.</span>
<span lang="EN-US">In this paper, a low-complexity model is proposed for linearizing power amplifiers with memory effects using the digital predistortion (DPD) technique. In the proposed model, the linear, low-order nonlinear and high-order nonlinear memory effects are computed separately to provide flexibility in controlling the model parameters so that both high performance and low model complexity can be achieved. The performance of the proposed model is assessed based on experimental measurements of a commercial class AB power amplifier by applying a single-carrier wideband code division multiple access (WCDMA) signal. The linearity performance and the model complexity of the proposed model are compared with the memory polynomial (MP) model and the DPD with single-feedback model. The experimental results show that the proposed model outperforms the latter model by 5 dB in terms of adjacent channel leakage power ratio (ACLR) with comparable complexity. Compared to MP model, the proposed model shows improved ACLR performance by 10.8 dB with a reduction in the complexity by 17% in terms of number of floating-point operations (FLOPs) and 18% in terms of number of model coefficients.</span>
In this paper, an end-fire microstrip patch antenna (MPA) is proposed of 3 GHz as a center frequency, designed, simulated, and measured to work on WiMAX frequencies within standard of 802.16e (WiMAX). A high gain ranged between (12.117-13.324) dB, high front to back ratio (F/B) of (35.770) at the center frequency, a wide band of 1.701 GHz, low profile, and semi-ideal voltage standing wave ratio (VSWR) of 1.053 is achieved. The simulation is done using computer simulation technology (CST-MW). The proposed design is based on two Fire-retardant substrates (FR-4) of relative permittivity (ε) 4.3+j0.025 and 1.53 mm thickness for each one, which is considered a high loss material. The measurement results show good agreement with the simulated results. In addition, the design can be used for harvesting power supply from mobile towers. Finally, the proposed design is compared with two other designs in terms of power conversion efficiency and overall size.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.