Electron transfer from valence to conduction band states in semiconductors is the basis of modern electronics. Here, attosecond extreme ultraviolet (XUV) spectroscopy is used to resolve this process in silicon in real time. Electrons injected into the conduction band by few-cycle laser pulses alter the silicon XUV absorption spectrum in sharp steps synchronized with the laser electric field oscillations. The observed ~450-attosecond step rise time provides an upper limit for the carrier-induced band-gap reduction and the electron-electron scattering time in the conduction band. This electronic response is separated from the subsequent band-gap modifications due to lattice motion, which occurs on a time scale of 60 ± 10 femtoseconds, characteristic of the fastest optical phonon. Quantum dynamical simulations interpret the carrier injection step as light-field–induced electron tunneling.
Over the last few years, extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high degree of precision. An appealing and challenging route toward engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, i.e., to provide a unique framework that allows us to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory. This article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, such as the new theoretical framework of quantum electrodynamics density-functional formalism for the description of novel light–matter hybrid states. Those advances, and others being released soon as part of the Octopus package, will allow the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (quantum electrodynamical-materials).
Short, intense laser pulses can be used to access the transition regime between classical and quantum optical responses in dielectrics. In this regime, the relative roles of inter- and intraband light-driven electronic transitions remain uncertain. We applied attosecond transient absorption spectroscopy to investigate the interaction between polycrystalline diamond and a few-femtosecond infrared pulse with intensity below the critical intensity of optical breakdown. Ab initio time-dependent density functional theory calculations, in tandem with a two-band parabolic model, accounted for the experimental results in the framework of the dynamical Franz-Keldysh effect and identified infrared induction of intraband currents as the main physical mechanism responsible for the observations.
Electric-field-induced charge separation (polarization) is the most fundamental manifestation of the interaction of light with matter and a phenomenon of great technological relevance. Nonlinear optical polarization produces coherent radiation in spectral ranges inaccessible by lasers and constitutes the key to ultimate-speed signal manipulation. Terahertz techniques have provided experimental access to this important observable up to frequencies of several terahertz. Here we demonstrate that attosecond metrology extends the resolution to petahertz frequencies of visible light. Attosecond polarization spectroscopy allows measurement of the response of the electronic system of silica to strong (more than one volt per ångström) few-cycle optical (about 750 nanometres) fields. Our proof-of-concept study provides time-resolved insight into the attosecond nonlinear polarization and the light-matter energy transfer dynamics behind the optical Kerr effect and multi-photon absorption. Timing the nonlinear polarization relative to the driving laser electric field with sub-30-attosecond accuracy yields direct quantitative access to both the reversible and irreversible energy exchange between visible-infrared light and electrons. Quantitative determination of dissipation within a signal manipulation cycle of only a few femtoseconds duration (by measurement and ab initio calculation) reveals the feasibility of dielectric optical switching at clock rates above 100 terahertz. The observed sub-femtosecond rise of energy transfer from the field to the material (for a peak electric field strength exceeding 2.5 volts per ångström) in turn indicates the viability of petahertz-bandwidth metrology with a solid-state device.
High-harmonic generation by a highly non-linear interaction of infrared laser fields with matter allows for the generation of attosecond pulses in the XUV spectral regime. This process, well established for atoms, has been recently extended to the condensed phase. Remarkably well pronounced harmonics up to order ∼ 30 have been observed for dielectrics. We present the first ab-initio multiscale simulation of solid-state high-harmonic generation. We find that mesoscopic effects of the extended system, in particular the realistic sampling of the entire Brillouin zone, the pulse propagation in the dense medium, and the inhomogeneous illumination of the crystal have a strong effect on the formation of clean harmonic spectra. Our results provide a novel explanation for the formation of clean harmonics and have implications for a wide range of non-linear optical processes in dense media.PACS numbers: 42.65. Ky, 42.50.Hz, 72.20.Ht The generation of high harmonics (HHG) in the nonlinear interaction of intense ultrashort infrared (IR) laser pulses with matter has turned out to be a highly successful route towards the generation of attosecond pulses in the EUV and XUV spectral regimes [1][2][3][4]. It has become the workhorse of investigation of a vast array of electronic processes on the attosecond time scale [5]. Expanding the range of accessible photon energies and intensities faces, however, fundamental limitations. Experimental and theoretical investigations have established a scaling of the cut-off energy E cut ∝ λ 2 for HHG from atoms in the gas phase raising hopes to reach ever higher photon energies by increasing the wavelength λ of the driving laser pulse. However, the intensity in the cut-off region was found to scale unfavorably I cut ∝ λ −5.3 due to the large spatial dispersion of the electron wave packet upon return to its parent atom [6][7][8][9][10]. Propagation effects in gas filled capillaries have been found to partially offset this suppression at high λ [11].Extending HHG to the condensed phase promises to overcome some of these limitations to enable compact and brighter light sources and to open up the novel field of solid-state photonics on the attosecond scale. The recent observation of HHG in solids for intensities below the damage threshold [12][13][14][15][16][17][18] suggests opportunities for controlling electronic dynamics [16,17] and for an alloptical reconstruction of the band structure [19].The observed solid-state HHG substantially differs from the corresponding atomic spectra. For example, while for atoms the cut-off frequency ω HHG cut scales linearly with the (peak) intensity I 0 of the driving pulse [20,21] One major puzzle has remained so far unresolved: while many experiments display remarkably "clean" harmonic spectra with pronounced peaks near multiples of the driving frequency (odd multiples when inversion symmetry is preserved) all the way up to the cutoff frequency, corresponding simulations display a noisy spectrum lacking any clear harmonic structure over a wide range of fre...
We theoretically investigate the generation of ultrafast currents in insulators induced by strong few-cycle laser pulses. Ab initio simulations based on time-dependent density functional theory give insight into the atomic-scale properties of the induced current signifying a femtosecond-scale insulator-metal transition. We observe the transition from nonlinear polarization currents during the laser pulse at low intensities to tunnelinglike excitation into the conduction band at higher laser intensities. At high intensities, the current persists after the conclusion of the laser pulse considered to be the precursor of the dielectric breakdown on the femtosecond scale. We show that the transferred charge sensitively depends on the orientation of the polarization axis relative to the crystal axis, suggesting that the induced charge separation reflects the anisotropic electronic structure. We find good agreement with very recent experimental data on the intensity and carrier-envelope phase dependence [A. Schiffrin et al., Nature (London) 493, 70 (2013).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.