The design of low-cost yet high-efficiency electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) over a wide pH range is highly challenging. We now report a hierarchical co-assembly of interacting MoS 2 and Co 9 S 8 nanosheets attached on Ni 3 S 2 nanorod arrays which are supported on nickel foam (NF). This tiered structure endows high performance toward HER and OER over a very broad pH range. By adjusting the molar ratio of the Co:Mo precursors, we have created CoMoNiS-NF-xy composites (x:y means Co:Mo molar ratios ranging from 5:1 to 1:3) with controllable morphology and composition. The three-dimensional composites have an abundance of active sites capable of universal pH catalytic HER and OER activity. The CoMoNiS-NF-31 demonstrates the best electrocatalytic activity, giving ultralow overpotentials (113, 103, and 117 mV for HER and 166, 228, and 405 mV for OER) to achieve a current density of 10 mA cm −2 in alkaline, acidic, and neutral electrolytes, respectively. It also shows a remarkable balance between electrocatalytic activity and stability. Based on the distinguished catalytic performance of CoMoNiS-NF-31 toward HER and OER, we demonstrate a two-electrode electrolyzer performing water electrolysis over a wide pH range, with low cell voltages of 1.54, 1.45, and 1.80 V at 10 mA cm −2 in alkaline, acidic, and neutral media, respectively. First-principles calculations suggest that the high OER activity arises from electron transfer from Co 9 S 8 to MoS 2 at the interface, which alters the binding energies of adsorbed species and decreases overpotentials. Our results demonstrate that hierarchical metal sulfides can serve as highly efficient all-pH (pH = 0−14) electrocatalysts for overall water splitting.

The MoS4(2-) ion was intercalated into magnesium-aluminum layered double hydroxide (MgAl-NO3-LDH) to produce a single phase material of Mg0.66Al0.34(OH)2(MoS4)0.17·nH2O (MgAl-MoS4-LDH), which demonstrates highly selective binding and extremely efficient removal of heavy metal ions such as Cu(2+), Pb(2+), Ag(+), and Hg(2+). The MoS4-LDH displays a selectivity order of Co(2+), Ni(2+), Zn(2+) < Cd(2+) ≪ Pb(2+) < Cu(2+) < Hg(2+) < Ag(+) for the metal ions. The enormous capacities for Hg(2+) (∼500 mg/g) and Ag(+) (450 mg/g) and very high distribution coefficients (Kd) of ∼10(7) mL/g place the MoS4-LDH at the top of materials known for such removal. Sorption isotherm for Ag(+) agrees with the Langmuir model suggesting a monolayer adsorption. It can rapidly lower the concentrations of Cu(2+), Pb(2+), Hg(2+), and Ag(+) from ppm levels to trace levels of ≤1 ppb. For the highly toxic Hg(2+) (at ∼30 ppm concentration), the adsorption is exceptionally rapid and highly selective, showing a 97.3% removal within 5 min, 99.7% removal within 30 min, and ∼100% removal within 1 h. The sorption kinetics for Cu(2+), Ag(+), Pb(2+), and Hg(2+) follows a pseudo-second-order model suggesting a chemisorption with the adsorption mechanism via M-S bonding. X-ray diffraction patterns of the samples after adsorption demonstrate the coordination and intercalation structures depending on the metal ions and their concentration. After the capture of heavy metals, the crystallites of the MoS4-LDH material retain the original hexagonal prismatic shape and are stable at pH ≈ 2-10. The MoS4-LDH material is thus promising for the remediation of heavy metal polluted water.

There is a need to develop highly selective and efficient materials for capturing uranium (normally as UO2(2+)) from nuclear waste and from seawater. We demonstrate the promising adsorption performance of S(x)-LDH composites (LDH is Mg/Al layered double hydroxide, [S(x)](2-) is polysulfide with x = 2, 4) for uranyl ions from a variety of aqueous solutions including seawater. We report high removal capacities (q(m) = 330 mg/g), large K(d)(U) values (10(4)-10(6) mL/g at 1-300 ppm U concentration), and high % removals (>95% at 1-100 ppm, or ∼80% for ppb level seawater) for UO2(2+) species. The S(x)-LDHs are exceptionally efficient for selectively and rapidly capturing UO2(2+) both at high (ppm) and trace (ppb) quantities from the U-containing water including seawater. The maximum adsorption coeffcient value K(d)(U) of 3.4 × 10(6) mL/g (using a V/m ratio of 1000 mL/g) observed is among the highest reported for U adsorbents. In the presence of very high concentrations of competitive ions such as Ca(2+)/Na(+), S(x)-LDH exhibits superior selectivity for UO2(2+), over previously reported sorbents. Under low U concentrations, (S4)(2-) coordinates to UO2(2+) forming anionic complexes retaining in the LDH gallery. At high U concentrations, (S4)(2-) binds to UO2(2+) to generate neutral UO2S4 salts outside the gallery, with NO3(-) entering the interlayer to form NO3-LDH. In the presence of high Cl(-) concentration, Cl(-) preferentially replaces [S4](2-) and intercalates into LDH. Detailed comparison of U removal efficiency of S(x)-LDH with various known sorbents is reported. The excellent uranium adsorption ability along with the environmentally safe, low-cost constituents points to the high potential of S(x)-LDH materials for selective uranium capture.

Hexagonal close-packed Ni (h-Ni) nanocrystals and face-centered cubic Ni (c-Ni) nanoflowers with uniform size and high dispersion have been successfully assembled on graphene nanosheets (GN) via a facile one-step solution-phase strategy under different reaction conditions, where the reduction process of graphite oxide (GO) sheets into GN was accompanied by the generation of Ni nanocrystals. The reduction of GO by this method is effective, which was confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopy and is comparable to conventional methods. The phase and morphology of nickel can be easily tuned by varying the reaction temperature and solvent. It was shown that the as-formed h-Ni nanocrystals with a diameter as small as 3 nm are grown densely and uniformly on the graphene sheets, and as a result the aggregation of the h-Ni nanocrystals was effectively prevented. In addition, c-Ni nanospheres assembled by c-Ni nanocrystals with a size of 15 nm were also uniformly deposited on the graphene sheets. The investigation of the microwave absorbability reveals that the three Ni/GN nanocomposites exhibit excellent microwave absorbability, which is stronger than the corresponding Ni nanostructures.

Low-dimensional organic–inorganic hybrid metal halides have emerged as broadband light emitters for phosphor-converted white light-emitting diodes (WLEDs). Herein, we report a new zero-dimensional (0-D) lead-free metal halide (PMA)3InBr6 [PMA+: (C6H5CH2NH3)+] that crystallizes in the monoclinic system with P21/c space group. The structure consists of slightly distorted [InBr6]3– octahedra surrounded by organic PMA+ cations. The direct band gap characteristic of (PMA)3InBr6 was demonstrated by density functional theory calculation, and its relatively wide band gap of 3.78 eV was experimentally determined. Upon 365 nm ultraviolet light excitation, (PMA)3InBr6 exhibited strong broadband orange luminescence with a full-width at half-maximum of ∼132 nm resulting from self-trapped exciton emission, and the photoluminescence quantum yield was determined to be ∼35%. A WLED fabricated by combining the orange-emitting (PMA)3InBr6, a green phosphor Ba2SiO4:Eu2+, and a blue phosphor BaMgAl10O17:Eu2+ exhibited a high color-rendering index of 87.0. Our findings indicate that the organic–inorganic hybrid (PMA)3InBr6 may have potential for luminescence-based applications.

Cobalt is a promising soft metallic magnetic material used for important applications in the field of absorbing stealth technology, especially for absorbing centimeter waves. However, it frequently presents a weak dielectric property because of its instability, aggregation, and crystallographic form. A method for enhancing the electromagnetic property of metal Co via phase-controlled synthesis of Co nanostructures grown on graphene (GN) networks has been developed. Hexagonal close-packed cobalt (α-Co) nanocrystals and face-centered cubic cobalt (β-Co) nanospheres with uniform size and high dispersion have been successfully assembled on GN nanosheets via a facile one-step solution-phase strategy under different reaction conditions in which the exfoliated graphite oxide (graphene oxide, GO) nanosheets were reduced along with the formation of Co nanocrystals. The as-synthesized Co/GN nanocomposites showed excellent microwave absorbability in comparison with the corresponding Co nanocrystals or GN, especially for the nanocomposites of GN and α-Co nanocrystals (the reflection loss is -47.5 dB at 11.9 GHz), which was probably because of the special electrical properties of the cross-linked GN nanosheets and the perfect electromagnetic match in their microstructure as well as the small particle size of Co nanocrystals. The approach is convenient and effective. Some magnetic metal or alloy materials can also be prepared via this route because of its versatility.

Intercalation of polysulfides into LDHs forms layered composites that can separate Hg2+, Ag+ and Cu2+ from mixed ions with high selectivity and capacity.

We demonstrate strong iodine (I 2 ) vapor adsorption using Mg/Al layered double hydroxide (MgAl-LDH) nanocomposites intercalated with polysulfide (S x 2−) groups (S x -LDH, x = 2, 4, 6). The asprepared LDH/polysulfide hybrid materials display highly efficient iodine capture resulting from the reducing property of the intercalated polysulfides. During adsorption, the I 2 molecules are reduced to I 3 − anions by the intercalated [S x ] 2− groups that simultaneously are oxidized to form S 8 . In addition to the chemical adsorption, additional molecular I 2 is physically captured by the LDH composites. As a result of these parallel processes, and despite their very low BET surface areas, the iodine capture capacities of S 2 -LDH, S 4 -LDH, and S 6 -LDH are ∼1.32, 1.52, and 1.43 g/g, respectively, with a maximum adsorption of 152% (wt %). Thermogravimetric and differential thermal analysis (TG-DTA), energy dispersive X-ray spectroscopy (EDS), and temperature-variable powder X-ray diffraction (XRD) measurements show the resulting I 3 − ions that intercalated into the LDH gallery have high thermal stability (≥350 °C). The excellent iodine adsorption performance combined with the facile preparation points to the S x -LDH systems as potential superior materials for adsorption of radioactive iodine, a waste product of the nuclear power industry.