A smart sensing platform based on a triboelectric nanogenerator (TENG) possesses various advantages such as self-powering, convenience, real-time and biocompatibility. However, the detection limit of the TENG-based sensor is required to be improved. In this study, a high performance TENG-based glucose sensor was proposed by using the Ti3C2Tx (MXene)/graphene oxide (GO) composite electrode. The MXene and GO nanosheets are popular 2D materials which possessed high conductivity and a rich surface functional group. The MXene/GO thin films were prepared through electrostatic self-assembly technology, which can effectively impede the agglomeration of two nanoflakes. The as-prepared MXene/GO film presented outstanding mechanical property. To figure out the relationship between the nanostructure of MXene/GO film and the TENG, a series of MXene/GO-based TENG with different GO sizes was characterized. As a result, the TENG with 400 nm GO demonstrated the highest output performance. Subsequently, the optimized TENG was used in glucose detection application without the assistance of a glucose enzyme. This simple and flexible TENG shows promising potential in biosensors and non-invasive health monitoring.

The flexible self-powered display system integrating a flexible triboelectric nanogenerator (TENG) and flexible alternating current electroluminescence (ACEL) has attracted increasing attention for its promising potential in human–machine interaction applications. In this work, a performance-enhanced MXene/cellulose nanofibril (CNF)/MXene-based TENG (MCM-TENG) is reported for powering a flexible patterned ACEL device in order to realize self-powered display. The MCM multilayer composite film was self-assembled through the layer-by-layer method. The MCM film concurrently acted as a triboelectric layer and electrode layer due to its high conductivity and strength. Moreover, the effect of CNF concentration and number of layers on the output performance of TENG was investigated. It was found that the MCM-TENG realized the optimum output performance. Finally, a flexible self-powered display device was realized by integrating the flexible TENG and ACEL. The MCM-TENG with an output voltage of ≈90 V at a frequency of 2 Hz was found to be efficient enough to power the ACEL device. Therefore, the as-fabricated flexible TENG demonstrates a promising potential in terms of self-powered displays and human–machine interaction.