A plasmonic "molecule" consisting of a radiative element coupled with a subradiant (dark) element is theoretically investigated. The plasmonic molecule shows electromagnetic response that closely resembles the electromagnetically induced transparency in an atomic system. Because of its subwavelength dimension, this electromagnetically induced transparency-like molecule can be used as a building block to construct a "slow light" plasmonic metamaterial.

Surfaces covered by ultrathin plasmonic structures--so-called metasurfaces--have recently been shown to be capable of completely controlling the phase of light, representing a new paradigm for the design of innovative optical elements such as ultrathin flat lenses, directional couplers for surface plasmon polaritons and wave plate vortex beam generation. Among the various types of metasurfaces, geometric metasurfaces, which consist of an array of plasmonic nanorods with spatially varying orientations, have shown superior phase control due to the geometric nature of their phase profile. Metasurfaces have recently been used to make computer-generated holograms, but the hologram efficiency remained too low at visible wavelengths for practical purposes. Here, we report the design and realization of a geometric metasurface hologram reaching diffraction efficiencies of 80% at 825 nm and a broad bandwidth between 630 nm and 1,050 nm. The 16-level-phase computer-generated hologram demonstrated here combines the advantages of a geometric metasurface for the superior control of the phase profile and of reflectarrays for achieving high polarization conversion efficiency. Specifically, the design of the hologram integrates a ground metal plane with a geometric metasurface that enhances the conversion efficiency between the two circular polarization states, leading to high diffraction efficiency without complicating the fabrication process. Because of these advantages, our strategy could be viable for various practical holographic applications.

Metamaterials are artificially engineered structures that have properties, such as a negative refractive index, not attainable with naturally occurring materials. Negative-index metamaterials (NIMs) were first demonstrated for microwave frequencies, but it has been challenging to design NIMs for optical frequencies and they have so far been limited to optically thin samples because of significant fabrication challenges and strong energy dissipation in metals. Such thin structures are analogous to a monolayer of atoms, making it difficult to assign bulk properties such as the index of refraction. Negative refraction of surface plasmons was recently demonstrated but was confined to a two-dimensional waveguide. Three-dimensional (3D) optical metamaterials have come into focus recently, including the realization of negative refraction by using layered semiconductor metamaterials and a 3D magnetic metamaterial in the infrared frequencies; however, neither of these had a negative index of refraction. Here we report a 3D optical metamaterial having negative refractive index with a very high figure of merit of 3.5 (that is, low loss). This metamaterial is made of cascaded 'fishnet' structures, with a negative index existing over a broad spectral range. Moreover, it can readily be probed from free space, making it functional for optical devices. We construct a prism made of this optical NIM to demonstrate negative refractive index at optical frequencies, resulting unambiguously from the negative phase evolution of the wave propagating inside the metamaterial. Bulk optical metamaterials open up prospects for studies of 3D optical effects and applications associated with NIMs and zero-index materials such as reversed Doppler effect, superlenses, optical tunnelling devices, compact resonators and highly directional sources.

Benefitting from the flexibility in engineering their optical response, metamaterials have been used to achieve control over the propagation of light to an unprecedented level, leading to highly unconventional and versatile optical functionalities compared with their natural counterparts. Recently, the emerging field of metasurfaces, which consist of a monolayer of photonic artificial atoms, has offered attractive functionalities for shaping wave fronts of light by introducing an abrupt interfacial phase discontinuity. Here we realize three-dimensional holography by using metasurfaces made of subwavelength metallic nanorods with spatially varying orientations. The phase discontinuity takes place when the helicity of incident circularly polarized light is reversed. As the phase can be continuously controlled in each subwavelength unit cell by the rod orientation, metasurfaces represent a new route towards high-resolution on-axis three-dimensional holograms with a wide field of view. In addition, the undesired effect of multiple diffraction orders usually accompanying holography is eliminated.

Surface topography and refractive index profile dictate the deterministic functionality of a lens. The polarity of most lenses reported so far, that is, either positive (convex) or negative (concave), depends on the curvatures of the interfaces. Here we experimentally demonstrate a counter-intuitive dual-polarity flat lens based on helicity-dependent phase discontinuities for circularly polarized light. Specifically, by controlling the helicity of the input light, the positive and negative polarity are interchangeable in one identical flat lens. Helicity-controllable real and virtual focal planes, as well as magnified and demagnified imaging, are observed on the same plasmonic lens at visible and near-infrared wavelengths. The plasmonic metalens with dual polarity may empower advanced research and applications in helicity-dependent focusing and imaging devices, angular-momentum-based quantum information processing and integrated nano-optoelectronics.

Metal-based negative refractive index materials have been extensively studied in the microwave region. However, negative-index metamaterials have not been realized at near-IR or visible frequencies due to difficulties of fabrication and to the generally poorer optical properties of metals at these wavelengths. In this paper, we report the first fabrication and experimental verification of a transversely structured metal-dielectric-metal multilayer exhibiting a negative refractive index around 2 µm. Both the amplitude and the phase of the transmission and reflection were measured experimentally, and are in good agreement with a rigorous coupled wave analysis. PACS: 78.20.Ci; 42.25.Bs; 42.79.Dj Negative refractive-index materials are of great interest for a variety of potential applications. 1 Because natural negative refractive index materials do not exist, artificial structures have been proposed and fabricated that exhibit an effective negative index over limited frequency ranges. 2 The two principal approaches to the realization of negative refraction are metamaterials and photonic crystals. Metamaterials typically use metallic structures to provide a negative permittivity and use resonant structures (inductor-capacitor tank circuits) with a scale much smaller than the wavelength to provide a negative permeability leading to negative refraction, while § Email: brueck@chtm.unm.edu photonic crystals exhibit negative refraction as a consequence of band-folding effects. In the microwave region, negative index materials have been demonstrated using both approaches, while in the visible spectral region, negative refraction has been recently predicted. 3 In recent work, magnetically resonant structures exhibiting negative permeability have been demonstrated in the mid-infrared. 4,5 Despite theoretical studies and numerical modeling, 6,7 demonstration of negative refraction at near-infrared (near-IR) and visible wavelengths is as yet missing and, therefore, the experimental demonstration of a negative refractive index around 2 µm presented here represents an important milestone.Extension of metamaterials based on split ring resonators 8 to near-IR and visible wavelengths necessarily involves complicated and often difficult fabrication for the nanoscale metallic structures used to generate the requisite resonances. On the other hand, much of the photonic crystal literature has focused on all-dielectric structures because of their low-loss characteristics.Recent related work has used periodic metallic structures to couple incident radiation to surface plasma waves giving enhanced optical transmission through arrays of sub-wavelength holes in a metal film. 9,10 In this work, a hybrid approach is introduced which uses a pair of metal layers separated by a dielectric to provide resonant interactions (e. g. distributed inductance/capacitance) along with a periodic array of holes through the film stack to facilitate interaction with the surface plasma waves of the composite structure.The structure consists of a glass subs...

Phosphorene is a new family member of two-dimensional materials. We observed strong and highly layer-dependent photoluminescence in few-layer phosphorene (two to five layers). The results confirmed the theoretical prediction that few-layer phosphorene has a direct and layer-sensitive band gap. We also demonstrated that few-layer phosphorene is more sensitive to temperature modulation than graphene and MoS2 in Raman scattering. The anisotropic Raman response in few-layer phosphorene has enabled us to use an optical method to quickly determine the crystalline orientation without tunneling electron microscopy or scanning tunneling microscopy. Our results provide much needed experimental information about the band structures and exciton nature in few-layer phosphorene.

Ultrathin metasurfaces consisting of a monolayer of subwavelength plasmonic resonators are capable of generating local abrupt phase changes and can be used for controlling the wavefront of electromagnetic waves. The phase change occurs for transmitted or reflected wave components whose polarization is orthogonal to that of a linearly polarized (LP) incident wave. As the phase shift relies on the resonant features of the plasmonic structures, it is in general wavelength-dependent. Here, we investigate the interaction of circularly polarized (CP) light at an interface composed of a dipole antenna array to create spatially varying abrupt phase discontinuities. The phase discontinuity is dispersionless, that is, it solely depends on the orientation of dipole antennas, but not their spectral response and the wavelength of incident light. By arranging the antennas in an array with a constant phase gradient along the interface, the phenomenon of broadband anomalous refraction is observed ranging from visible to near-infrared wavelengths. We further design and experimentally demonstrate an ultrathin phase gradient interface to generate a broadband optical vortex beam based on the above principle.