Thermoacoustic imaging (TAI) is an emerging high-resolution and high-contrast imaging technology. In recent years, metal wires have been used in TAI experiments to quantitatively evaluate the spatial resolution of different systems. However, there is still a lack of analysis of the response characteristics and principles of metal wires in TAI. Through theoretical and simulation analyses, this paper proposes that the response of metal (copper) wires during TAI is equivalent to the response of antennas. More critically, the response of the copper wire is equivalent to the response of a half-wave dipole antenna. When its length is close to half the wavelength of the incident electromagnetic wave, it obtains the best response. In simulation, when the microwave excitation frequencies are 1.3[Formula: see text]GHz, 3.0[Formula: see text]GHz, and 5.3[Formula: see text]GHz, and the lengths of copper wires are separately set to 11[Formula: see text]cm, 5[Formula: see text]cm, and 2.5[Formula: see text]cm, the maximum SAR distribution and energy coupling efficiency are obtained. This result is connected with the best response of half-wave dipole antennas with lengths of 11[Formula: see text]cm, 4.77[Formula: see text]cm, and 2.7[Formula: see text]cm under the theoretical design, respectively. Regarding the further application, TAI can be used to conduct guided minimally invasive surgery on surgical instrument imaging. Thus, this paper indicated that results can also guide the design of metal surgical instruments utilized in different microwave frequencies.
Microwave-induced thermoacoustic imaging (MTI) has the advantages of high resolution, high contrast, non-ionization, and non-invasive. Recently, MTI was used in the field of breast cancer screening. In this paper, based on the finite element method (FEM) and COMSOL Multiphysics software, a three-dimensional breast cancer model suitable for exploring the MTI process is proposed to investigate the influence of Young’s modulus (YM) of breast cancer tissue on MTI. It is found that the process of electromagnetic heating and initial pressure generation of the entire breast tissue is earlier in time than the thermal expansion process. Besides, compared with normal breast tissue, tumor tissue has a greater temperature rise, displacement, and pressure rise. In particular, YM of the tumor is related to the speed of thermal expansion. In particular, the larger the YM of the tumor is, the higher the heating and contraction frequency is, and the greater the maximum pressure is. Different Young’s moduli correspond to different thermoacoustic signal spectra. In MTI, this study can be used to judge different degrees of breast cancer based on elastic imaging. In addition, this study is helpful in exploring the possibility of microwave-induced thermoacoustic elastic imaging (MTAE).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.