In this study, a low-profile ultrahigh frequency (UHF) radio-frequency identification (RFID) tag antenna designed for wristbands in healthcare applications is proposed. The radiator is based on the open-slot cavity technique that is composed of a slotted patch (double-T slots) loaded onto a flexible open cavity. The proposed slotted design can easily allow the tag's input impedance to be tuned to the complex impedance of typical UHF RFID chips. The proposed tag antenna has a size of 86 mm × 25 mm × 1.6 mm (0.26 0 × 0.07 0 × 0.004 0 ) at 915 MHz, and it can yield a maximum reading range of 8 m (stand alone in free-space condition), 6.6 m (when placed on the human wrist in free-space condition), and up to 3 m (when placed on the human wrist in a crowded condition).

A very small size radio frequency identification (RFID) tag antenna specifically designed for racing pigeon ring applications is proposed. The structure of this UHF tag is a closed‐loop type printed on a 30 × 8 mm2 polyimide film of thickness 0.063 mm. Thus, it can be wrapped into a double layer plastic cylindrical ring of size similar to those used for racing pigeon. By simply tuning the inner width of the loop, good conjugate matching between the tag chip input impedance and the tag antenna can be achieved. When mounted onto a real preserved dried pigeon feet specimen, the measured impedance bandwidth of the tag antenna was 901‐929 MHz. Further experimental results have also shown that the proposed antenna has a maximum reading range of up to 50 cm.

No abstract

No abstract