The development of highly reversible multielectron reaction per redox center in sodium super ionic conductor-structured cathode materials is desired to improve the energy density of sodium-ion batteries. Here, we investigated more than one-electron storage of Na in NaVCr(PO). Combining a series of advanced characterization techniques such as ex situ V solid-state nuclear magnetic resonance, X-ray absorption near-edge structure, and in situ X-ray diffraction, we reveal that V/V and V/V redox couples in the materials can be accessed, leading to a 1.5-electron reaction. It is also found that a light change on the local electronic and structural states or phase change could be observed after the first cycle, resulting in the fast capacity fade at room temperature. We also showed that the irreversibility of the phase changes could be largely suppressed at low temperature, thus leading to a much improved electrochemical performance.

P2-type sodium nickel manganese oxide-based cathode materials with higher energy densities are prime candidates for applications in rechargeable sodium ion batteries. A systematic study combining in situ high energy X-ray diffraction (HEXRD), ex situ X-ray absorption fine spectroscopy (XAFS), transmission electron microscopy (TEM), and solid-state nuclear magnetic resonance (SS-NMR) techniques was carried out to gain a deep insight into the structural evolution of P2-Na0.66Ni0.33-xZnxMn0.67O2 (x = 0, 0.07) during cycling. In situ HEXRD and ex situ TEM measurements indicate that an irreversible phase transition occurs upon sodium insertion-extraction of Na0.66Ni0.33Mn0.67O2. Zinc doping of this system results in a high structural reversibility. XAFS measurements indicate that both materials are almost completely dependent on the Ni(4+)/Ni(3+)/Ni(2+) redox couple to provide charge/discharge capacity. SS-NMR measurements indicate that both reversible and irreversible migration of transition metal ions into the sodium layer occurs in the material at the fully charged state. The irreversible migration of transition metal ions triggers a structural distortion, leading to the observed capacity and voltage fading. Our results allow a new understanding of the importance of improving the stability of transition metal layers.

Slow lithium diffusion kinetics of H1 phase during discharge determines the initial irreversible capacity loss of NCM-based materials. By controlling lithium diffusion rate in the discharge process, extra capacity is obtained in the materials.

Li-substitution can improve the structural stability by forming an intermediate O′3 phase that can ease the destructive O3–P3 direct phase transition.