Introduction: With the increased popularity of implants, orthodontists are in search of a better material. Titanium-gold (Ti-Au) is a newer material and could be a choice to replace the currently popular titanium-aluminum-vanadium (Ti-6Al-4Va) alloy. Materials and Methods: Using the finite element analysis method, three-dimensional computer-aided models of a mini-implant was designed. Two cylindrical bone pieces into which the implant was inserted were used. A force magnitude of 5 N was then horizontally and separately applied to the implant head. Results: Comparison of the maximum von Mises stress in the implants of Ti-6Al-4Va and Ti-Au was done. The maximum stress value of 252.356 and 242.415 Mpa, as well as maximum deformation of 0.025 mm and 0.019 mm, on Ti-6Al-4Va and Ti-Au can be observed, respectively. Conclusion: It was found that the maximum stress and maximum deformation values were lower in Ti-Au as compared to Ti-6Al-4Va implant. As the Ti-Au implant has greater resistance to deformation, it can be concluded that this newer alloy has better strength than Ti-6Al-4Va implant.
Aim: To evaluate and compare the rate of orthodontic tooth movement and root resorption by microosteoperforation (MOP) and mechanical vibration in young adults with bimaxillary protrusion.Method: Twenty patients having class I bimaxillary protrusion who required all first premolar extraction were allocated into two groups MOP (Group A) and mechanical vibration (Group B), with a 1:1 allocation ratio. After leveling alignment MOP was performed on either side of the arch, and vibration was applied on the contralateral side 20 mins per day. Canines were retracted with nickel-titanium coil springs, and Alginate impressions were taken every four weeks till 4 months.Result: The mean rate of retraction of canines of Group A was more than Group B. There was a statistically significant difference between Group A and Group B. (p=0.0120) Conclusion: The mean rate of retraction of canines treated by MOP was 1.15 mm per 4 weeks, and by mechanical vibration, 0.8mm per 4 weeks.
Objective s: The aim of this study is to verify and assess the usefulness of intercanine arch width, intermolar arch width, and canine fossa width in maxilla and intercanine and intermolar width in mandible for gender determination in the adult population. In medicolegal cases, estimation of gender using the skeletal remains of victims is imperative. The identity of an individual can be verified by examination of teeth and surrounding tissues from skeletal remains. Measurements from teeth and skull can help a Forensic Odontologist to identify deceased victims by age, gender, or race. The association of skeletal remains with gender gains utmost importance in cases of mass fatality such as earthquakes, tsunami, accidents, cyclones, and floods. If an individual is not in a condition to be identified, then they can be identified from the dentition or remains of dentition during any natural or manmade calamities. The benefit of determining gender in mass calamities is that accurately determined gender confines the number of missing individuals to one-half of the population in the majority cases. Many studies pertaining to maxillary arch widths have been performed yet the literature regarding mandibular arch widths remains scarce. Furthermore, in the literature, very few studies have been carried out to correlate canine fossa width and gender of an individual. Material and Methods: The study was carried out on a sample size of 120 study models, between 18 to and 35 years in department of orthodontics and dentofacial orthopedics and the samples had equal male and female distribution. A digital vernier caliper measured the intercanine arch width, intermolar arch width and canine fossa width and the parameters were measured by a single observer and statistical analysis was performed. Results: Intercanine arch width in maxillary arch was 36.38 ± 3.08 mm and 33.44 ± 2.72 mm for males and females correspondingly with P < 0.001 which is statistically highly significant. Intermolar arch width in maxillary arch was 47.81 ± 3.02 mm and 45.2 ± 2.64 mm for males and females correspondingly with P < 0.001 which is statistically highly significant. Canine fossa width in maxillary arch was 43.42 ± 2.58 mm and 40.36 ± 2.32 mm for males and females correspondingly with P < 0.001 which is statistically highly significant. Intercanine arch width in mandibular arch was 27.43 ± 2.96 mm and 26.2 ± 1.97 mm for males and females correspondingly with P < 0.05 which is statistically significant. Intermolar arch width in mandibular arch was 41.88 ± 3.47 mm and 39.89 ± 2.48 mm for males and females correspondingly with P < 0.001 which is statistically highly significant. After employing the receiver operating curve, to figure out specificity and sensitivity of the parameters, high specificity of 97%, with the best sensitivity of 78% was recorded for the maxillary canine fossa width. Conclusion: The results show that in cases of mass calamities, maxillary canine fossa width will prove to be useful tool in gender determination accurately after analyzing the dental remains of young missing adults with multiple missing teeth. This will further aid the forensic odontologist to determine identity of the missing individual.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.