Cadmium sulfide (CdS) nanoparticle-sensitized titanium oxide nanocorals (TNC) were synthesized using a two-step deposition process. The TiO(2) nanocorals were grown on the conducting glass substrates (FTO) using A hydrothermal process and CdS nanoparticles were loaded on TNC using successive ionic layer adsorption and reaction (SILAR) method. The TiO(2), CdS and TiO(2)-CdS samples were characterized by optical absorption, X-ray diffraction (XRD), FT-Raman, FT-IR, scanning electron microscopy (SEM) and contact angle. Further, their photoelectrochemical (PEC) performance was tested in NaOH, Na(2)S-NaOH-S and Na(2)S electrolytes, respectively. When CdS nanoparticles are coated on TNCs, the optical absorption is found to be enhanced and band edge is red-shifted towards visible region. The TiO(2)-CdS sample exhibits improved photoelectrochemical (PEC) performance with maximum short circuit current of (J(sc)) 1.04 mA cm(-2). After applying these TiO(2)-CdS electrodes in photovoltaic cells, the photocurrent was found to be enhanced by 2.7 and 32.5 times, as compared with those of bare CdS and TiO(2) nanocorals films electrodes respectively. Also, the power conversion efficiency of TiO(2)-CdS electrodes is 0.72%, which is enhanced by about 16 and 29 times for TiO(2), CdS samples.

Lead sulphide (PbS) quantum dot (QD) sensitized anatase TiO(2) nanocorals (TNC) were synthesized by SILAR and hydrothermal techniques. The TNC, PbS and PbS-TNC samples were characterized by optical absorption, XRD, FT-IR, FESEM and XPS. The results show that PbS QDs are coated on the TNCs, the optical absorption is found to be enhanced and the band edge is shifted to ~693 nm as compared with plain TNCs at 340 nm. The PbS-TNC sample exhibits an improved photoelectrochemical performance with a maximum short circuit current (J(sc)) of 3.84 mA cm(-2). The photocurrent density was found to be enhanced 2 fold, as compared with those of the bare PbS photoelectrode. The total power conversion efficiency of the PbS-TNC electrodes is 1.23%.