Riser Base Gas Lift is one of several methods successfully deployed that can enhance production and suppress severe slugging. With few moving parts, it is a solution that can be accommodated into existing infrastructure with minimal upgrades on existing facilities while not being as maintenance intensive as other solutions. The flow assurance design is critical to successful implementation and this paper details this process through the means of a case study. The case study in question is a three well, deep water subsea tie-back. The subsea system consists of an 8" × 12" pipe-in-pipe round-trip piggable flowline loop which will experience severe terrain slugging. Riser base gas lift had been implemented with success on adjacent fields at this facility; therefore it was again selected for deployment. From a Flow Assurance perspective, design considerations discussed are: Optimum Injection Rate/Operating Range: Flowrate requirements that will effectively mitigate slugging and will not violate any operating constraints.Low Temperature Mitigation: Design against brittle material failure.Erosion Control: Assessment of droplet erosion.Production Chemistry: Design to prevent formation of hydrates/asphaltenes in the production system due to injection of gas.Testing/Benchmarking: Since system design is heavily dependent on the accuracy of simulation modelling, details of equipment flow tests to validate performance are discussed.Recommendations/Support to Operations: Development of standard operating practices associated with gas lift.Execution Issues: Detailing design adaptations to system changes during installation etc.Revalidation: Review of actual operational performance against design intent. For this field, a novel technological solution of a gas-lift umbilical riser was selected. This configuration provides the best balance of operability, reliability and cost. The operating philosophy uses a fixed subsea orifice /topside choke to control the gas flow (rather than the conventional variable subsea choke). The orifice will regulate the injection rate even as the system pressure varies due to slugging, allowing the umbilical to act as an accumulator that dampens the pressure variations and allows for a larger bandwidth and smoother operation. Ultimately this configuration is envisioned to be less dependent on operator interaction.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.