A variable parameter incrementation method is proposed and then applied to the determination of parametric instability boundary of columns. Attention is particularly paid to the geometrically nonlinear problems including the instability of nonlinear vibrations. Although only beam and column problems are treated at present, the approach is believed to be general in methodology. This method is not subjected to the limitations of small exciting parameters and weak nonlinearity.
International audienceThis paper evaluates the performance of face and speaker verification techniques in the context of a mobile environment. The mobile environment was chosen as it provides a realistic and challenging test-bed for biometric person verification techniques to operate. For instance the audio environment is quite noisy and there is limited control over the illumination conditions and the pose of the subject for the video. To conduct this evaluation, a part of a database captured during the " Mobile Biometry " (MOBIO) European Project was used. In total there were nine participants to the evaluation who submitted a face verification system and five participants who submitted speaker verification systems. The results have shown that the best performing face and speaker verification systems obtained the same level of performance, respectively 10.9% and 10.6% of HTER
Backlash is a key internal excitation on the dynamic response of planetary gear transmission. After the gear transmission running for a long time under load torque, due to tooth wear accumulation, the backlash between the tooth surface of two mating gears increases, which results in a larger and irregular backlash. However, the increasing backlash generated by tooth accumulated wear is generally neglected in lots of dynamics analysis for epicyclic gear trains. In order to investigate the impact of backlash generated by tooth accumulated wear on dynamic behavior of compound planetary gear set, in this work, first a static tooth surface wear prediction model is incorporated with a dynamic iteration methodology to get the increasing backlash generated by tooth accumulated wear for one pair of mating teeth under the condition that contact ratio equals to one. Then in order to introduce the tooth accumulated wear into dynamic model of compound planetary gear set, the backlash excitation generated by tooth accumulated wear for each meshing pair in compound planetary gear set is given under the condition that contact ratio equals to one and does not equal to one. Last, in order to investigate the impact of the increasing backlash generated by tooth accumulated wear on dynamic response of compound planetary gear set, a nonlinear lumped-parameter dynamic model of compound planetary gear set is employed to describe the dynamic relationships of gear transmission under the internal excitations generated by worn profile, meshing stiffness, transmission error, and backlash. The results indicate that the introduction of the increasing backlash generated by tooth accumulated wear makes a significant influence on the bifurcation and chaotic characteristics, dynamic response in time domain, and load sharing behavior of compound planetary gear set.
An unusual prevalence of recombinant GII.2 noroviruses (GII.P16-GII.2) in Guangdong, China, at the end of 2016 caused a sharp increase in outbreaks of acute gastroenteritis. This event was another non-GII.4 epidemic that emerged after the GII.17 viruses in 2014 and 2015 and warrants global surveillance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.