His interests are metaheuristics, optimization, fuzzy neural networks.

Microfluidics, a field that has been well-established for several decades, has seen extensive applications in the areas of biology, chemistry, and medicine. However, it might be very hard to imagine how such soft microfluidic devices would be used in other areas, such as electronics, in which stiff, solid metals, insulators, and semiconductors have previously dominated. Very recently, things have radically changed. Taking advantage of native properties of microfluidics, advances in microfluidics-based electronics have shown great potential in numerous new appealing applications, e.g. bio-inspired devices, body-worn healthcare and medical sensing systems, and ergonomic units, in which conventional rigid, bulky electronics are facing insurmountable obstacles to fulfil the demand on comfortable user experience. Not only would the birth of microfluidic electronics contribute to both the microfluidics and electronics fields, but it may also shape the future of our daily life. Nevertheless, microfluidic electronics are still at a very early stage, and significant efforts in research and development are needed to advance this emerging field. The intention of this article is to review recent research outcomes in the field of microfluidic electronics, and address current technical challenges and issues. The outlook of future development in microfluidic electronic devices and systems, as well as new fabrication techniques, is also discussed. Moreover, the authors would like to inspire both the microfluidics and electronics communities to further exploit this newly-established field.

We present a 2.4 GHz unbalanced loop antenna that can be stretched along multiple dimensions simultaneously. It was realized by incorporating room temperature liquid metal alloy into microstructured channels in an elastic material. The demonstrated prototype exhibits a stretchability of up to 40% along two orthogonal orientations as well as foldability and twistability. Port impedance and radiation characteristics of the nonstretched and stretched antenna were studied numerically and experimentally. Measured results indicate a radiation efficiency of more than 80%.

Stretchable electronics is a revolutionary technology that will potentially create a world of radically different electronic devices and systems that open up an entirely new spectrum of possibilities. This article proposes a microfluidic based solution for stretchable radio frequency (RF) electronics, using hybrid integration of active circuits assembled on flex foils and liquid alloy passive structures embedded in elastic substrates, e.g. polydimethylsiloxane (PDMS). This concept was employed to implement a 900 MHz stretchable RF radiation sensor, consisting of a large area elastic antenna and a cluster of conventional rigid components for RF power detection. The integrated radiation sensor except the power supply was fully embedded in a thin elastomeric substrate. Good electrical performance of the standalone stretchable antenna as well as the RF power detection sub-module was verified by experiments. The sensor successfully detected the RF radiation over 5 m distance in the system demonstration. Experiments on two-dimensional (2D) stretching up to 15%, folding and twisting of the demonstrated sensor were also carried out. Despite the integrated device was severely deformed, no failure in RF radiation sensing was observed in the tests. This technique illuminates a promising route of realizing stretchable and foldable large area integrated RF electronics that are of great interest to a variety of applications like wearable computing, health monitoring, medical diagnostics, and curvilinear electronics.

This article describes the implementation and characterization of a new self‐contained large‐area wireless strain sensor, operating around 1.5 GHz, based on the concept of multi‐layer microfluidic stretchable radiofrequency electronics (μFSRFEs). Compared to existing solutions, the presented integrated strain sensor is capable of remotely detecting repeated high tensile dynamic strains of up to 15% over very large surfaces or movable parts, and gets rid of all hardwiring to external storage or data processing equipment. Unlike conventional electronic devices, the major part of the sensor is a mechanically reconfigurable and reversibly deformable patch antenna, which consists of two layers of liquid metal alloy filled microfluidic channels in a silicone elastomer. A simplified radiofrequency (RF) transmitter composed of miniaturized rigid active integrated circuits (ICs) associated with discrete passive components was assembled on a flexible printed circuit board (FPCB) and then heterogeneously integrated to the antenna. The elastic patch antenna can withstand repeated mechanical stretches while still maintaining its electrical function to some extent, and return to its original state after removal of the stress. Additionally, its electrical characteristics at frequency of operation are highly sensitive to mechanical strains. Consequently, not only is this antenna a radiator for transmitting and receiving RF signals like any other conventional antennas, but also acts as a reversible large‐area strain sensor in the integrated device. Good electrical performance of the standalone antenna and the RF transmitter sub‐module was respectively verified by experiments. Furthermore, a personal computer (PC)‐assisted RF receiver for receiving and processing the measured data was also designed, implemented, and evaluated. In the real‐life demonstration, the integrated strain sensor successfully monitored periodically repeated human body motion, and wirelessly transmitted the measured data to the custom‐designed receiver at a distance of 5m in real‐time.

No abstract

No abstract

successfully implemented. It has a simple configuration and is easy to fabricate. The approaches to achieve optimization for the proposed antenna are completed via simulation, and the experimental results show wide bandwidth of approximately 61% and 29% for both lower and upper band, respectively. ACKNOWLEDGMENTThe authors thank Yuan-Pu Hsieh for his assistance in completing the design of this antenna. ABSTRACT: Artificial immune systems are classified as computational systems inspired by theoretical immunology and are mechanisms that can solve complex problems. Clonal selection algorithm is a selection algorithm, which is derived as a special selection algorithm to this artificial intelligence concept. In this work, Clonal selection algorithm is applied to design a simple microwave matching network for a load with arbirtary impedance. The results obtained were tested in a microwave simulator and indicated that clonal selection algorithm can be very effectively applied for microwave design problems.