No abstract

No abstract

A comprehensive characterization of the GPU-3 Stirling engine losses with the aid of the CFD approach is presented. Firstly, a detailed description of the losses-related phenomena along with the method of calculating each type of loss are addressed. Secondly, an energy analysis of the engine is carried out in order to specify the impact of each type of losses on the performance. Finally, the design effectivity of each component of the engine is investigated using an exergy analysis. The results reveal that the hysteresis loss occurs mainly within the working spaces due to the flow jetting during the first part of the expansion strokes. Additionally, the pressure difference between the working spaces is the main driver for the flow leakage through the appendix gap. The exposure of the displacer top wall to the jet of hot gas flowing into the expansion space during expansion stroke essentially increases the shuttle heat loss. A new definition for the regenerator effectiveness is presented to assess the quality of the heat storage and recovery processes. The energy analysis shows that regenerator thermal loss and pumping power represent the largest part of the engine losses by about 9.2% and 7.5% of the heat input, respectively. The exergy losses within regenerator and cold space are the highest values among the components, consequently, they need to be redesigned.

No abstract

Design and three-dimensional simulation of a solar Dish-Stirling (SDS) engine is currently performed. The design starts with the GPU-3 Stirling engine, which is originally built to generate power from the fossil fuel exclusively. The design is conducted through three subsequent phases. Firstly, several parabolic dishes with different rim angles and number of facets are investigated to optimally design the dish concentrator. Secondly, different relative positions of the receiver aperture to the dish focal plane are tested to reach the optimal position. The optical simulation of the solar concentration process is carried out using SolTRACE software. Finally, an optimal design for a cavity receiver that involves a new structure of the heater tubes is performed. The simulation of the engine with the designed receiver is implemented using the commercial CFD code ANSYS FLUENT. Having finished the design, a comprehensive energy analysis of the designed SDS engine is carried out. The results show that a nearly uniform temperature distribution of the heater tubes throughout the cycle is achieved. The overall thermal efficiency of the designed SDS engine is about 31.8 % at a DNI of 1000 W/m2.