The recent rise of semiconductor nanowires opens new opportunities for realizing high efficiency photovoltaic devices at low cost due to the unique one-dimensional structure with remarkable electrical and optical properties. Particularly, silicon nanowires (SiNWs), as one of the most earthabundant materials, have been investigated worldwide to develop cost-effective solar cells. Great efforts have been devoted to fabricating ordered/disordered SiNWs using cost-effective approaches and achieving optimized structural parameters, such as array periodicity, nanowire morphology, length and diameter. Systematic theoretical investigations along with experimental studies on optical and electrical properties of SiNWs have been carried out. These efforts have led to obtaining remarkable improvement of the power conversion efficiency of SiNW solar cells from <1% to >10% in the last few years. However, till now, the power conversion efficiency of these SiNW solar cells is far from satisfactory for any commercial applications compared with the traditional bulk silicon solar cells. Further development of SiNW solar cells requires better understanding of the optical and electrical properties of the nanowire solar cells. Improvement in fabrication of high quality nanowires in a controlled fashion also plays a significant role in nanowire solar cell design and fabrication. To guide future development of SiNW solar cells, the recent work on SiNWs is reviewed. Following that, various techniques aiming to achieve high quality nanowires at low cost are introduced. Both bottom-up and top-down techniques are discussed. Then, electrical properties and various types of solar cells based on SiNWs are discussed. Finally challenges and prospects of SiNW solar cells are presented.

Iron pyrite (FeS2) nanostructures are of considerable interest for photovoltaic applications due to improved material quality compared to their bulk counterpart. As an abundant and nontoxic semiconductor, FeS2 nanomaterials offer great opportunities for low-cost and green photovoltaic technology. This paper describes the fabrication of FeS2 nanowire arrays via sulfurization of iron oxide nanotubes at relatively low temperatures. A facile synthesis of ordered iron oxide nanotubes was achieved through anodization of iron foils. Characterization of the iron sulfide nanowires indicates that pyrite structures were formed. A prototype FeS2 nanowire photoconductor demonstrates very high responsivity (>3.0 A/W). The presented method can be further explored to fabricate various FeS2 nanostructures, such as nanoparticles, nanoflowers, and nanoplates.

Earth-abundant iron pyrite (FeS2) shows great potential as a light absorber for solar cells and photodetectors due to their high absorption coefficient (>105 cm-1). In this paper, high-quality phase-pure and single crystalline pyrite nanocrystals were synthesized via facile, low-cost, and environment friendly hydrothermal method. The molar ratio of sulphur to iron and the reaction time play a crucial role in determining the quality and morphology of FeS2 nanocrystals. X-ray diffraction and high-resolution transmission electron microscopy confirm that phase-pure and single crystalline pyrite nanocrystals can be synthesized with high sulphur to iron molar ratio and sufficient reaction time. For the first time, a crystalline nanogap pyrite photodetector with promising photocurrent and UV-visible photoresponse has been fabricated. This work further demonstrates a facile route to synthesize high-quality FeS2 nanomaterials and their potential in optoelectronic applications.

No abstract