The development of efficient and low-cost electrocatalysts for oxygen evolution reaction is critical for improving the water electrolysis efficiency. Here we report a strategy using Fe substitution to enable the inactive spinel CoAl 2 O 4 to become highly active and superior to the benchmark IrO 2. The Fe substitution is revealed to facilitate the surface reconstruction into active Co oxyhydroxides under OER conditions. It also activates the deprotonation on the reconstructed oxyhydroxide to induce negatively charged oxygen as active site, thus significantly enhancing the OER activity of CoAl 2 O 4. Furthermore, it promotes the pre-oxidation of Co and introduces great structural flexibility due to the uplift of the O 2p levels. This results in an accumulation of surface oxygen vacancy along with lattice oxygen oxidation that terminates as Al 3+ leaches, preventing further reconstruction. We showcase a promising way to achieve tunable electrochemical reconstruction by optimizing the electronic structure for low-cost and robust spinel oxide OER catalysts.

A summary and analysis of approaches for measuring the surface areas of metal oxide electrocatalysts for evaluating their intrinsic electrocatalytic activity.

Cobalt-containing spinel oxides are promising electrocatalysts for the oxygen evolution reaction (OER) owing to their remarkable activity and durability. However, the activity still needs further improvement and related fundamentals remain untouched. The fact that spinel oxides tend to form cation deficiencies can differentiate their electrocatalysis from other oxide materials, for example, the most studied oxygen-deficient perovskites. Here, a systematic study of spinel ZnFe Co O oxides (x = 0-2.0) toward the OER is presented and a highly active catalyst superior to benchmark IrO is developed. The distinctive OER activity is found to be dominated by the metal-oxygen covalency and an enlarged CoO covalency by 10-30 at% Fe substitution is responsible for the activity enhancement. While the pH-dependent OER activity of ZnFe Co O (the optimal one) indicates decoupled proton-electron transfers during the OER, the involvement of lattice oxygen is not considered as a favorable route because of the downshifted O p-band center relative to Fermi level governed by the spinel's cation deficient nature.

LaCoO 3 is an active, stable catalyst in alkaline solution for oxygen evolution reaction (OER). With lower cost, it is a potential alternative to precious metal oxides like IrO 2 and RuO 2 in water electrolysis. However, room still remains for improving its activity according to recent understandings of OER on perovskite oxides. In this work, Fe substitution has been introduced in LaCoO 3 to boost its OER performance. Density function theory (DFT) calculation verified that the enhanced performance originates from the enhanced Co 3d-O 2p covalency with 10 at% Fe substitution in LaCoO 3 . Both DFT calculations and Superconducting Quantum Design (SQUID) magnetometer (MPMS-XL) showed a Co 3+ spin state transition from generally low spin state (LS: t 2g 6 e g 0 , S = 0) to a higher spin state with the effect of 10 at% Fe substitution. X-ray absorption near-edge structure (XANES) supports DFT calculations on an insulator to half-metal transition with 10 at% Fe substitution, induced by spin state transition. The half-metallic LaCo 0.9 Fe 0.1 O 3 possesses increased overlap between Co 3d and O 2p states, which results in enhanced covalency and promoted OER performance. This finding enlightens a new way of tuning the metal−oxygen covalency in oxide catalysts for OER.

renewable and ecofriendly energy technologies, such as fuel cells and water splitting. Currently, theoretical insights of oxygen electrocatalysis mainly focus on the thermodynamic features of the adsorption/desorption of reactants and intermediates. Besides the thermodynamic features, the electron transfer between the adsorbed reactants/intermediates and the active sites, and the charge transport within the catalysts during the electrocatalysis, are also a crucial factor influencing the reaction kinetics. That is, a comprehensible understanding of oxygen electrocatalysis should consider both the orbital interactions and the electron transfer behavior. In the domain of oxygen electrocatalysis (at room temperature in water), the electron transfer exhibits highly spin-related character because the ground state of O 2 mole cule is a triplet state (↑OO↑) (Figure 1). That is why O 2 is paramagnetic. Therefore, either from H 2 O/OH − to O 2 (oxygen evolution reaction, OER) or from O 2 to H 2 O/OH − (oxygen reduction reaction, ORR), the involvement of the triplet O 2 requires spin-related electron transfer along these oxygen reactions, which plays a considerable role in the reaction kinetics. The aspect of spin-related electron transfer has been unintentionally neglected and only a few pioneer works have noticed and emphasized its role. An early attempt can be traced back Oxygen evolution and reduction reactions play a critical role in determining the efficiency of the water cycling (H 2 O ⇔ H 2 + 1 2 O 2), in which the hydrogen serves as the energy carrier. That calls for a comprehensive understanding of oxygen electrocatalysis for efficient catalyst design. Current opinions on oxygen electrocatalysis have been focused on the thermodynamics of the reactant/intermediate adsorption on the catalysts. Because the oxygen molecule is paramagnetic, its production from or its reduction to diamagnetic hydroxide/water involves spin-related electron transfer. Both electron transfer and orbital interactions between the catalyst and the reactant/intermediate show spin-dependent character, making the reaction kinetics and thermodynamics sensitive to the spin configurations. Herein, a brief introduction on the spintronic explanation of the catalytic phenomena on oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is given. The local spin configurations and orbital interactions in the benchmark transition-metalbased catalysts for OER and ORR are analyzed as examples. To further understand the spintronic oxygen electrocatalysis and to develop more efficient spintronic catalysts, the challenges are summarized and future opportunities proposed. Spin electrocatalysis may emerge as an important topic in the near future and help integrate a comprehensive understanding of oxygen electrocatalysis.

Producing hydrogen by water electrolysis suffers from the kinetic barriers in the oxygen evolution reaction (OER) that limits the overall efficiency. With spin-dependent kinetics in OER, to manipulate the spin ordering of ferromagnetic OER catalysts (e.g., by magnetization) can reduce the kinetic barrier. However, most active OER catalysts are not ferromagnetic, which makes the spin manipulation challenging. In this work, we report a strategy with spin pinning effect to make the spins in paramagnetic oxyhydroxides more aligned for higher intrinsic OER activity. The spin pinning effect is established in oxideFM/oxyhydroxide interface which is realized by a controlled surface reconstruction of ferromagnetic oxides. Under spin pinning, simple magnetization further increases the spin alignment and thus the OER activity, which validates the spin effect in rate-limiting OER step. The spin polarization in OER highly relies on oxyl radicals (O∙) created by 1st dehydrogenation to reduce the barrier for subsequent O-O coupling.

Spinel oxides have attracted growing interest over the years for catalysing the oxygen evolution reaction (OER) due to their efficiency and cost-effectiveness, but the fundamental understanding of the structure-property relationships remains elusive. Here we demonstrate that the OER activity on spinel oxides is intrinsically dominated by the covalency competition between tetrahedral and octahedral sites. The competition fabricates an asymmetric MT−O−MO backbone where the bond with weaker metal-oxygen covalency determines the exposure of cation sites and therefore the activity. Driven by this finding, a dataset with more than 300 spinel oxides is computed and used to train a machine learning model for screening the covalency competition in spinel oxides, with a mean absolute error of 0.05 eV. [Mn]T[Al0.5Mn1.5]OO4 is predicted to be a highly active OER catalyst and subsequent experimental results confirm its superior activity. This work sets mechanistic principles of spinel oxides for water oxidation, which may be extendable to other applications.

The development of efficient electrocatalysts that lower the overpotential of oxygen evolution reaction (OER) is of great importance in improving the overall efficiency of hydrogen fuel production by water electrolysis. [1] Commercially, precious metal oxides catalysts such as IrO 2 are used. [2] However, their elemental scarcity and high cost have triggered a search for cost-effective OER electrocatalysts such as 3d transition metal oxides. Among them, families such as the perovskite ABO 3 and the spinel AB 2 O 4 ones have attracted great attention due to their tunable structural/elemental properties allowed by A and B site cation substitution. [3,4] Perovskite ABO 3 oxides have a simple structure with rare-earth or alkaline earth element occupying cuboctahedral A-site while the B-site transition metal (TM) sites in an octahedral environment. [3] Spinel oxides, however, can be either normal or inverse structure depending on the relative occupancy of divalent and trivalent cations in the octahedral and Developing highly active electrocatalysts for oxygen evolution reaction (OER) is critical for the effectiveness of water splitting. Low-cost spinel oxides have attracted increasing interest as alternatives to noble metalbased OER catalysts. A rational design of spinel catalysts can be guided by studying the structural/elemental properties that determine the reaction mechanism and activity. Here, using density functional theory (DFT) calculations, it is found that the relative position of O p-band and M Oh (Co and Ni in octahedron) d-band center in ZnCo 2−x Ni x O 4 (x = 0-2) correlates with its stability as well as the possibility for lattice oxygen to participate in OER. Therefore, it is testified by synthesizing ZnCo 2−x Ni x O 4 spinel oxides, investigating their OER performance and surface evolution. Stable ZnCo 2−x Ni x O 4 (x = 0-0.4) follows adsorbate evolving mechanism under OER conditions. Lattice oxygen participates in the OER of metastable ZnCo 2−x Ni x O 4 (x = 0.6, 0.8) which gives rise to continuously formed oxyhydroxide as surface-active species and consequently enhances activity. ZnCo 1.2 Ni 0.8 O 4 exhibits performance superior to the benchmarked IrO 2 . This work illuminates the design of highly active metastable spinel electrocatalysts through the prediction of the reaction mechanism and OER activity by determining the relative positions of the O p-band and the M Oh d-band center.