In this work, the hemocompatibility of zwitterionic polypropylene (PP) fibrous membranes with varying grafting coverage of poly(sulfobetaine methacrylate) (PSBMA) via plasma-induced surface polymerization was studied. Charge neutrality of PSBMA-grafted layers on PP membrane surfaces was controlled by the low-pressure and atmospheric plasma treatment in this study. The effects of grafting composition, surface hydrophilicity, and hydration capability on blood compatibility of the membranes were determined. Protein adsorption onto the different PSBMA-grafted PP membranes from human fibrinogen solutions was measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Blood platelet adhesion and plasma clotting time measurements from a recalcified platelet-rich plasma solution were used to determine if platelet activation depends on the charge bias of the grafted PSBMA layer. The charge bias of PSBMA layer deviated from the electrical balance of positively and negatively charged moieties can be well-controlled via atmospheric plasma-induced interfacial zwitterionization and was further tested with human whole blood. The optimized PSBMA surface graft layer in overall charge neutrality has a high hydration capability and keeps its original blood-inert property of antifouling, anticoagulant, and antithrmbogenic activities when it comes into contact with human blood. This work suggests that the hemocompatible nature of grafted PSBMA polymers by controlling grafting quality via atmospheric plasma treatment gives a great potential in the surface zwitterionization of hydrophobic membranes for use in human whole blood.
Herein, a pseudozwitterionic structure bearing moieties with mixed positive and negative charges is introduced to develop a potential biomaterial for wound dressing applications. New mixed-charge matrices were prepared by copolymerization of the negatively charged 3-sulfopropyl methacrylate (SA) and positively charged [2-(methacryloyloxy)ethyl] trimethylammonium (TMA) onto expanded polytetrafluoroethylene (ePTFE) membranes. The charge balance was effectively regulated through the control of the initial SA/TMA ratio. The focus was then laid on the assessment of a variety of essential properties of efficient wound dressings including, hydration property, resistance to fibrinogen adsorption, hemocompatibility, as well as resistance to fibroblast attachment and bacteria colonization. It was found that the pseudozwitterionic membranes, compared to those with charge bias in the poly(SA-co-TMA) structure, exhibited the best combination of major properties. Therefore, they were further tested for wound healing. Histological examination of mouse wound treated with the pseudozwitterionic membranes exhibited complete re-epithelialization and total formation of new connective tissues after 14 days, even leading to faster healing than using commercial dressing. Results presented in this work suggest that the mixed-charge copolymers with a perfect balance of positive and negative moieties represent the newest generation of biomaterials for wound dressings.
Aerosol particles significantly impact the regional environment, including climate change, specifically in periods of extensive biomass burning. The major agricultural and domestic combustion emission sources were assessed in nearsource and ambient monitoring campaigns in northwestern Vietnam during the dry season. The composition and microstructure of on-field burning and cooking emissions were analyzed with a variety of techniques. A wide range of observed PM 2.5 mass concentrations was categorized according to the smoke level, supported by the evolution of carbon fractions (OC and EC) as well as ionic species and molecular tracers (K + , levoglucosan, and mannosan). The OC/EC and individual organic compound ratios on days with high smoke levels indicate smoldering combustion of softwood and other local biomass species, impacting aerosol composition at the regional level. Acid and non-acid carbonyls, carboxylates, and aliphatic carbon functionalities in the PM 2.5 size fraction evolved with increasing smoke intensity, together with carbonates in coarse (PM 1-2.5 and PM 2.5-10 ) size fractions, indicating a large impact of smoke emissions and soil lifted up by the intense fires. Biomass burning influence increased the abundance of soot and organic particles in the submicron fraction from 12% at low to 59% and 68% at moderate and high smoke levels, respectively. Smoke micromarkers of local biomass burning source emissions determined the microstructure of ambient aerosols representative for northern Southeast Asia.
Cationic vectors are ideal candidates for gene delivery thanks to their capability to carry large gene inserts and their scalable production. However, their cationic density gives rise to high cytotoxicity. We present the proper designed core-shell polyplexes made of either poly(ethylene imine) (PEI) or poly(2-dimethylamino ethyl methacrylate) (PDMAEMA) as the core and zwitterionic poly(acrylic acid)-block-poly(sulfobetaine methacrylate) (PAA-b-PSBMA) diblock copolymer as the shell. Gel retardation and ethidium bromide displacement assays were used to determine the PEI/DNA or PDMAEMA/DNA complexation. At neutral pH, the copolymer serves as a protective shell of the complex. As PSBMA is a nonfouling block, the shell reduced the cytotoxicity and enhanced the hemocompatibility (lower hemolysis activity, longer plasma clotting time) of the gene carriers. PAA segments in the copolymer impart pH sensitivity by allowing deshielding of the core in acidic solution. Therefore, the transfection efficiency of polyplexes at pH 6.5 was better than at pH 7.0, from β-galactosidase assay, and for all PAA-b-PSBMA tested. These results were supported by more favorable physicochemical properties in acidic solution (zeta potential, particle size, and interactions between the polymer and DNA). Thus, the results of this study offer a potential route to the development of efficient and nontoxic pH-sensitive gene carriers.
Forging is a simple and low-cost mass production process. Metallic materials can be processed using plastic deformation. This research analyzes an innovative forging mold design for the highway bicycle pedal. A series of simulation analyses in which the variables depend on various temperatures of forging billet and mold, friction factors, and forging speed show effective stress, effective strain, and die radial load distribution for a forging process and mold design of a highway bicycle pedal. Finally, we identify the results of simulation analyses with the design of an experimental forging mold to lower deformation behavior of a highway bicycle pedal. The analysis results provide highway bicycle pedal forming mold references to identify whether it is suitable with the finite element results for high-strength mold design.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.