The surface plasmonic resonance, surface wettability, and related mechanical nanohardness and of face-centered-cubic (fcc) chromium nitride (CrN) films have been successfully manipulated via the simple method of tuning nitrogen-containing gas with different nitrogen-to-argon ratios, varying from 3.5 (N35), to 4.0 (N40), to 4.5 (N45), which is directly proportional to argon. All of the obtained CrN films showed that the surface wettability was due to hydrophilicity. All of the characteristics were mainly confirmed and explained by using X-ray diffraction (XRD) patterns, including plan-view and cross-section SEM images, with calculations of the average grain size performed via histograms accompanied by different preferred grain orientations. In the present work, not only the surface plasmonic resonance, but also the surface wettability and the related mechanical nanohardness of CrN films were found to be tunable via a simple method of introducing adjustable nitrogen-reactive-containing gas during the deposition process, while the authors suggest that the crystal orientation transition from the (111) to the (200) crystalline plane changed significantly with the nitrogen-containing gas. So the transition of the preferred orientation of CrN’s cubic close-packed from (111) to (200) varied at this composite, caused and found by the nitrogen-containing gas, which can be tuned by the nitrogen-to-argon ratio. The surface plasmonic resonance and photoluminescence quenching effects were coupled photon and electron oscillations, which could be observed, and which existed at the interface between the CrN and Au metals in the designed heterostructures.
The MgO nanolayer effect on the microstructure and magnetic characterizations added into Fe/Pt stacked films directly deposited onto MgO (001) single-crystal substrates at the reduced temperature of 380 °C using electron-beam technology was investigated in this present work. The nanograin isolation and exchange decoupling for the FePt–MgO system is attributed to the magnetic FePt isolated grains that originate from MgO atoms with a spreading behavior mostly along grain boundaries owing to its weaker surface energy than that of a single Fe or Pt element. The grain and domain size decreased when the MgO nanolayer was applied due to the interpenetration of MgO and created a strain-energy variation at the MgO/FePt interface. Measuring angular-dependent coercivity indicates a general trend of a domain-wall motion, and changes to the rotation of the reverse-domain model occurred as the MgO nanolayers were added into FePt films. The intergrain interaction is confirmed by the Kelly–Henkel plot, which shows that there is strong intergrain exchange coupling (positive δM type) between neighboring grains in the continuous Fe/Pt stacked films without MgO nanolayers. In addition, a negative δM type occurred when the Fe/Pt stacked films were added into MgO nanolayers, showing that the MgO nanolayer can be applied to adjust the force of intergrain exchange coupling between the adjacent FePt nanograins, and the addition of MgO nanolayers change into magnetic decoupling; thus, there was a formed dipole interaction in our claimed FePt–MgO composite structure of stacked ultrathin films at a reduced temperature of 380 °C.
The surface behavior of ZnO-based films can be modulated via the postannealing and ultraviolet (UV) illumination of different strengths and durations, respectively. The present results could provide the basis for modulating their microstructures with respect to the grain-size distribution and photocatalytic behavior, and act as a potential guide in the field of wide-bandgap semiconducting oxides. ZnO films were prepared at room temperature onto Corning-1737 glass substrates by applying radio-frequency magnetron sputtering without supplying an oxygen source. With the purpose of obtaining modulational grain microstructures, the as-prepared ZnO films (Z0) were treated via a postannealing modification in a vacuum furnace at 300 °C for 30 min after deposition (Z300), accompanied by adjustable internal stress. The contact angle (CA) value of the ZnO films was reduced from 95° to 68°, owing to the different grain microstructure accompanied by a change in the size variation. In addition, UV light with different illumination strengths could be used to improve the hydrophilicity, which varied from a hydrophobic status to a superhydrophilic status due to the desirable surface characteristics of its photocatalytic action. In addition, the photocatalytic activity of the ZnO films exhibited an effectual photodegradation of methylene blue (MB) under UV illumination, with a chemical reaction constant of 2.93 × 10−3 min−1. In this present work, we demonstrated that the CA value of the ZnO films not only caused a change from a hydrophobic to hydrophilic status, accompanied by a change in grain size combined with internal stress, but also, induced by the UV light illumination, was combined with photocatalytic activity simultaneously. On the other hand, an enhanced surface plasmonic resonance was observed, which was due to couple oscillations between the electrons and photons and was generated from the interface by using a flat, continuous Pt capping nanolayer. This designed structure may also be considered as a Pt electrode pattern onto ZnO (metal Pt/ceramic ZnO) for multifunctional, heterostructured sensors and devices in the near future.
The surface behavior of the ZnO-based films could be modulated via a postannealing and ultraviolet (UV) irradiation with different powers and time, respectively. These present results could provide modulate the microstructure related in grain-size distribution and photocatalytic behavior for potential guide in the field of wide bandgap semiconducting oxides. The ZnO films were prepared onto Corning-1737 glass substrates by using radio-frequency magnetron sputtering without supplying oxygen source at room temperature. For the purpose of obtaining modulable grain microstructures, the as-prepared ZnO films (Z0) were treated via a postannealing modification in vacuum furnace at 300°C for 30 minutes after deposition (Z300) accompanied with the adjustable internal stress. The contact angle (CA) value of ZnO film reduced from 95° to 68° was owning to the different grain microstructure accompanied by a change in size variation. In addition, the UV light with different irradiation powers could also be used to improve the hydrophilicity varied from hydrophobic status to superhydrophilic status due to the desirable surface characteristics of the photocatalytic action. In addition, the photocatalytic activity of ZnO film exhibited efficient photodegradation of methylene blue (MB) under UV irradiation, with a chemical reaction constant of 2.93×10-3 min−1. In this present work, we demonstrated that the CA value of the ZnO films not only caused from hydrophobic to hydrophilic status accompanied by a change in grain size combined with internal stress but also induced by the UV light irradiation combined with photocatalytic activity simultaneously. On the other hand, the enhanced surface plasmonic resonance could be observed that is due to couple electron and photon oscillations and can be generated at the interface between a flat, continuous Pt capping nanolayer. This designed structure could also be considered as a Pt electrode pattern onto ZnO (metal Pt/ ceramic ZnO) for multifunctional heterostructured sensors and devices in near future.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.