No abstract

Fermentative hydrogen production, as a process for clean energy recovery from organic wastewater, is limited by its low hydrogen yield due to incomplete conversion of substrates, with most of the fermentation products being volatile fatty acids (VFAs). Thus, further recovery of the energy from VFAs is expected. In this work, microbial fuel cell (MFC) was applied to recover energy in the form of electricity from mixed VFAs of acetate, propionate, and butyrate. Response surface methodology was adopted to investigate the relative contribution and possible interactions of the three components of VFAs. A stable electricity generation was demonstrated in MFCs after the enrichment of electrochemically active bacteria. Analysis showed that power density was more sensitive to the composition of mixed VFAs than coulombic efficiency. The electricity generation could mainly be attributed to the portion of acetate and propionate. However, the two components showed an antagonistic effect when propionate exceeded 19%, causing a decrease in coulombic efficiency. Butyrate was found to exert a negative impact on both power density and coulombic efficiency. Denaturing gradient gel electrophoresis profiles revealed the enrichment of electrochemically active bacteria from the inoculum sludge. Proteobacteria (Beta-, Delta-) and Bacteroidetes were predominant in all VFA-fed MFCs. Shifts in bacterial community structures were observed when different compositions of VFA mixtures were used as the electron donor. The overall electron recovery efficiency may be increased from 15.7% to 27.4% if fermentative hydrogen production and MFC processes are integrated.

Aquatic plants are widely used for phytoremediation, and effective disposal methods should be pursued for their utilization and to avoid further environmental pollution problems. This study demonstrated that, using an air-cathode microbial fuel cell (MFC) inoculated with rumen microorganisms, electricity could be directly produced with a maximum power density of 0.405 W/m(3) from Canna indica (canna), a lignocellulosic aquatic plant rich in cellulose, hemicellulose, and lignin, without pretreatment. The mechanisms of the Canna indica degradation in the MFC were elucidated through analyzing the changes of canna structure and intermediates, that is, soluble sugars and volatile fatty acids (VFAs), in the electricity generation process. The results showed that lignin was partially removed and more cellulose became exposed on the sample surface during the electricity generation in the MFC. The electron transfer in this MFC was mainly completed through electron shuttling via self-produced mediators. This work presents an attempt to understand how complex substrates like aquatic plants are decomposed in an MFC during electricity generation. It might, hopefully, provide a promising way to utilize lignocellulosic biomass for energy generation.

No abstract