Summary: Two types of ink‐jet inks are presented: ink containing an aqueous dispersion of silver nanoparticles and an oil‐in‐water microemulsion‐based ink. The metallic ink contains nanoparticles of silver, which are formed in the presence of an ionic polymeric stabilizer. Sintering of the printed image obtained with the use of such silver‐based inks at temperatures as low as 300 °C results in formation of patterns possessing noticeable conductivity. The microemulsion inks are based on a thermodynamically stable microemulsion, in which the dispersed oil phase is a volatile solvent containing a water‐insoluble colorant. After contact of the jetted ink droplets with a substrate, nanodroplets of the microemulsion are converted into nanoparticles of the solubilized colorant. In some cases, it was found that the evaporation of microemulsion ink droplets leads to formation of rings composed of ordered nanoparticles.Scheme of ink‐jet printing of an oil‐in‐water microemulsion followed by conversion of the nanodroplets into nanoparticles, caused by quick evaporation of the solvent within the microemulsion droplets. Therefore, the ink behaves as a dye‐based ink prior to printing, but after printing it behaves like a pigment‐based ink.magnified imageScheme of ink‐jet printing of an oil‐in‐water microemulsion followed by conversion of the nanodroplets into nanoparticles, caused by quick evaporation of the solvent within the microemulsion droplets. Therefore, the ink behaves as a dye‐based ink prior to printing, but after printing it behaves like a pigment‐based ink.