This paper presents a novel aerogel-based Triboelectric Nanogenerator (TENG) which shows a superior performance for energy harvesting and sensing applications. Polyimide-based aerogel film with varying open-cell content level is developed to be used as the main contact material for the TENG. The fabricated aerogel film is fully characterized to reveal the chemical and mechanical properties of the developed material. It is shown the use of Polyimide aerogel film remarkably enhances the performance of the TENG compared to a TENG with fully dense Polyimide layer with no porosity. This enhancement is due to the increase on the effective surface area, charge generation inside the open-cells of the aerogel, and increase on the relative capacitance of the TENG device. The effect of varying porosity from zero to 70% of open-cell content reveals that the aerogel film with 50% shows the highest performance where the peak open-circuit voltage of 40V and peak short-circuit current of 5 μA are obtained. These values are higher than those of the TENG with simple Polyimide layer with an order of magnitude. Finally, the performance of proposed TENG under resistive loads and capacitors are tested. Thus, this work presents an effective method for high performance TENG.
Bio-based polymers and multifunctional polymeric composites are promising for the development of new environmentally sustainable materials and are becoming increasingly popular compared to their oil based counterparts. This research aims to develop new multifunctional bio-based polymer composites with improved thermal conductivity and tailored electrical properties to be used as heat management materials in the electronics industry. A series of parametric studies were conducted to clarify the science behind the hybrid composites' behavior and their structure-toproperty relationships. Using bio-based polymers [e.g., polylactic acid (PLA)] as the matrix, heat transfer networks were developed and structured by embedding hexagonal boron nitride (hBN) and graphene nanoplatelets (GNP) in a PLA matrix. The effects of random uniform thermal hybrid networks of hBN-GNP on improving the effective thermal conductivity (k eff ) of produced composites were studied and compared. Composites were characterized with respect to physical, thermal, electrical, and mechanical properties for practical application in the electronics industry. The use of high thermally conductive hybrid filler systems, with optimized filler content, was found to promote the composites' effective thermal conductivity to more than 12 times over neat PLA. The thermally conductive composite is expected to provide unique opportunities to injection mold three-dimensional, net-shape, lightweight, and eco-friendly microelectronic enclosures with superior heat dissipation performance. POLYM. COMPOS., 37:2196-2205, 2016
Due to their high service temperature, excellent thermal insulation, nanoporous morphology, and low dielectric constant, polyimide (PI) aerogels have potential capability to be used in the next generation of microelectronic...
Aerogels owe their high thermal insulation and other unique properties to their nanostructure configuration. However, controlling the aerogels' morphology is always a scientific challenge. In this study, double dianhydride backbone (double backbone) polyimide aerogels with tailored nanostructure assembly are created for the first time. This is achieved by controlled polymerization reaction of oligomers with distinct dianhydride monomers. Combining the two oligomers through a controlled polymerization reaction is a successful strategy for tailoring the aerogels nanostructure assembly as well as other properties. The fabricated double backbone aerogel presents 40% reduced thermal conductivity of 19.7 mW mK−1 over previously studied polyimide aerogels along with the compression modulus of 1.64 MPa at a relatively low density of 0.068 g cm−3. Such low thermal conductivity is comparable with the inorganic counterparts. Light in weight and high thermally insulated polyimide aerogels with suitable mechanical properties and high service temperature are an appropriate replacement for current fireproof insulation materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.