No abstract

The Routing Protocol for Low-Power and Lossy Networks (RPL) is a novel routing protocol standardized for constrained environments such as 6LoWPAN networks. Providing security in IPv6/RPL connected 6LoWPANs is challenging because the devices are connected to the untrusted Internet and are resource constrained, the communication links are lossy, and the devices use a set of novel IoT technologies such as RPL, 6LoWPAN, and CoAP/CoAPs. In this paper we provide a comprehensive analysis of IoT technologies and their new security capabilities that can be exploited by attackers or IDSs. One of the major contributions in this paper is our implementation and demonstration of well-known routing attacks against 6LoWPAN networks running RPL as a routing protocol. We implement these attacks in the RPL implementation in the Contiki operating system and demonstrate these attacks in the Cooja simulator. Furthermore, we highlight novel security features in the IPv6 protocol and exemplify the use of these features for intrusion detection in the IoT by implementing a lightweight heartbeat protocol.

The Internet of Things (IoT) enables a wide range of application scenarios with potentially critical actuating and sensing tasks, e.g., in the e-health domain. For communication at the application layer, resource-constrained devices are expected to employ the constrained application protocol (CoAP) that is currently being standardized at the Internet Engineering Task Force. To protect the transmission of sensitive information, secure CoAP mandates the use of datagram transport layer security (DTLS) as the underlying security protocol for authenticated and confidential communication. DTLS, however, was originally designed for comparably powerful devices that are interconnected via reliable, high-bandwidth links. In this paper, we present Lithe-an integration of DTLS and CoAP for the IoT. With Lithe, we additionally propose a novel DTLS header compression scheme that aims to significantly reduce the energy consumption by leveraging the 6LoWPAN standard. Most importantly, our proposed DTLS header compression scheme does not compromise the end-to-end security properties provided by DTLS. Simultaneously, it considerably reduces the number of transmitted bytes while maintaining DTLS standard compliance. We evaluate our approach based on a DTLS implementation for the Contiki operating system. Our evaluation results show significant gains in terms of packet size, energy consumption, processing time, and network-wide response times when compressed DTLS is enabled.

Abstract-Real-world deployments of wireless sensor networks (WSNs) require secure communication. It is important that a receiver is able to verify that sensor data was generated by trusted nodes. It may also be necessary to encrypt sensor data in transit. Recently, WSNs and traditional IP networks are more tightly integrated using IPv6 and 6LoWPAN. Available IPv6 protocol stacks can use IPsec to secure data exchange. Thus, it is desirable to extend 6LoWPAN such that IPsec communication with IPv6 nodes is possible. It is beneficial to use IPsec because the existing end-points on the Internet do not need to be modified to communicate securely with the WSN. Moreover, using IPsec, true end-to-end security is implemented and the need for a trustworthy gateway is removed.In this paper we provide End-to-End (E2E) secure communication between IP enabled sensor networks and the traditional Internet. This is the first compressed lightweight design, implementation, and evaluation of 6LoWPAN extension for IPsec. Our extension supports both IPsec's Authentication Header (AH) and Encapsulation Security Payload (ESP). Thus, communication endpoints are able to authenticate, encrypt and check the integrity of messages using standardized and established IPv6 mechanisms.

The future Internet is an IPv6 network interconnecting traditional computers and a large number of smart objects. This Internet of Things (IoT) will be the foundation of many services and our daily life will depend on its availability and reliable operation. Therefore, among many other issues, the challenge of implementing secure communication in the IoT must be addressed. In the traditional Internet, IPsec is the established and tested way of securing networks. It is therefore reasonable to explore the option of using IPsec as a security mechanism for the IoT. Smart objects are generally added to the Internet using IPv6 over Low‐power Wireless Personal Area Networks (6LoWPAN), which defines IP communication for resource‐constrained networks. Thus, to provide security for the IoT based on the trusted and tested IPsec mechanism, it is necessary to define an IPsec extension of 6LoWPAN. In this paper, we present such a 6LoWPAN/IPsec extension and show the viability of this approach. We describe our 6LoWPAN/IPsec implementation, which we evaluate and compare with our implementation of IEEE 802.15.4 link‐layer security. We also show that it is possible to reuse crypto hardware within existing IEEE 802.15.4 transceivers for 6LoWPAN/IPsec. The evaluation results show that IPsec is a feasible option for securing the IoT in terms of packet size, energy consumption, memory usage, and processing time. Furthermore, we demonstrate that in contrast to common belief, IPsec scales better than link‐layer security as the data size and the number of hops grow, resulting in time and energy savings. Copyright © 2012 John Wiley & Sons, Ltd.

Abstract-IP technology for resource-constrained devices enables transparent end-to-end connections between a vast variety of devices and services in the Internet of Things (IoT). To protect these connections, several variants of traditional IP security protocols have recently been proposed for standardization, most notably the DTLS protocol. In this paper, we identify significant resource requirements for the DTLS handshake when employing public-key cryptography for peer authentication and key agreement purposes. These overheads particularly hamper secure communication for memory-constrained devices. To alleviate these limitations, we propose a delegation architecture that offloads the expensive DTLS connection establishment to a delegation server. By handing over the established security context to the constrained device, our delegation architecture significantly reduces the resource requirements of DTLS-protected communication for constrained devices. Additionally, our delegation architecture naturally provides authorization functionality when leveraging the central role of the delegation server in the initial connection establishment. Hence, in this paper, we present a comprehensive, yet compact solution for authentication, authorization, and secure data transmission in the IP-based IoT. The evaluation results show that compared to a public-key-based DTLS handshake our delegation architecture reduces the memory overhead by 64 %, computations by 97 %, network transmissions by 68 %.

No abstract

No abstract