Catching a fast flying object is particularly challenging as consists of two tasks: it requires extremely precise estimation of the object's motion and control of the robot motion. Any small imprecision may lead the fingers to close too abruptly and let the object fly away from the hand before closing. We present a strategy to overcome for sensorimotor imprecision by introducing softness in the catching approach. Soft catching consists of having the robot moves with the object for a short period of time, so as to leave more time for the fingers to close on the object. We use a dynamical systems (DS) based control law to generate the appropriate reach and follow motion, which is expressed as a Linear Parameter Varying (LPV) system. We propose a method to approximate the parameters of LPV systems using Gaussian Mixture Models, based on a set of kinematically feasible demonstrations generated by an off-line optimal control framework. We show theoretically that the resulting DS will intercept the object at the intercept point, at the right time with the desired velocity direction. Stability and convergence of the approach are assessed through Lyapunov stability theory. The proposed method is validated systematically to catch three objects that generate elastic contacts and demonstrate important improvement over a hard catching approach.

Coordination is essential in the design of dynamic control strategies for multi-arm robotic systems. Given the complexity of the task and dexterity of the system, coordination constraints can emerge from different levels of planning and control. Primarily, one must consider task-space coordination, where the robots must coordinate with each other, with an object or with a target of interest. Coordination is also necessary in joint space, as the robots should avoid self-collisions at any time. We provide such joint-space coordination by introducing a centralized inverse kinematics (IK) solver under self-collision avoidance constraints, formulated as a quadratic program and solved in real-time. The space of free motion is modeled through a sparse non-linear kernel classification method in a data-driven learning approach. Moreover, we provide multi-arm task-space coordination for both synchronous or asynchronous behaviors. We define a synchronous behavior as that in which the robot arms must coordinate with each other and with a moving object such that they reach for it in synchrony. In contrast, an asynchronous behavior allows for each robot to perform independent point-to-point reaching motions. To transition smoothly from asynchronous to synchronous behaviors and vice versa, we introduce the notion of synchronization allocation. We show how this allocation can be controlled through an external variable, such as the location of the object to be manipulated. Both behaviors and their synchronization allocation are encoded in a single dynamical system. We validate our framework on a dual-arm robotic system and demonstrate that the robots can re-synchronize and adapt the motion of each arm while avoiding self-collision within milliseconds. The speed of control is exploited to intercept fast moving objects whose motion cannot be predicted accurately.

Abstract-Various robotic applications including surgical instruments, wearable robots and autonomous mobile robots are often constrained with strict design requirements on high degrees of freedom (DoF) and minimal volume and weight. An intuitive design to meet these contradictory requirements is to embed locking mechanism in under actuated robotic manipulators to direct the actuation from a single and remote source to drive different joints on demand. Mechanical clutches do serve such purposes but often are bulky and require auxiliary mechanism making it difficult to justify the high cost adding the additional DoF, especially in cm scale.Here, we introduce an under-actuated robotic arm with shape memory polymer (SMP) joints. Through controlling the temperature, the stiffness of the joints can be adjusted and selected joints will be activated while the rest are fixed in their position. The presented prototype can control the joints independently with a coupled actuation from two stepper motors. Since we have redundant DoFs in the arm, there can be more than one configuration to reach a given position. We use a probabilistic technique to determine the optimum configuration with the minimum number of active joints that can yield the desired posture. In this paper, we report on the performance of the proposed design for the hardware and the configuration planner.

Objective. Translational studies on motor control and neurological disorders require detailed monitoring of sensorimotor components of natural limb movements in relevant animal models. However, available experimental tools do not provide a sufficiently rich repertoire of behavioral signals. Here, we developed a robotic platform that enables the monitoring of kinematics, interaction forces, and neurophysiological signals during user-defined upper limb tasks for monkeys. Approach. We configured the platform to position instrumented objects in a three-dimensional workspace and provide an interactive dynamic force-field. Main results. We show the relevance of our platform for fundamental and translational studies with three example applications. First, we study the kinematics of natural grasp in response to variable interaction forces. We then show simultaneous and independent encoding of kinematic and forces in single unit intra-cortical recordings from sensorimotor cortical areas. Lastly, we demonstrate the relevance of our platform to develop clinically relevant brain computer interfaces in a kinematically unconstrained motor task. Significance. Our versatile control structure does not depend on the specific robotic arm used and allows for the design and implementation of a variety of tasks that can support both fundamental and translational studies of motor control.

Abstract-Coordinated control strategies for multi-robot systems are necessary for tasks that cannot be executed by a single robot. This encompasses tasks where the workspace of the robot is too small or where the load is too heavy for one robot to handle. Using multiple robots makes the task feasible by extending the workspace and/or increase the payload of the overall robotic system. In this paper, we consider two instances of such tasks: a co-worker scenario in which a human hands over a large object to a robot; intercepting a large flying object. The problem is made difficult as the pick-up/intercept motions must take place while the object is in motion and because the object's motion is not deterministic. The challenge is then to adapt the motion of the robotic arms in coordination with one another and with the object. Determining the pick-up/intercept point is done by taking into account the workspace of the multi-arm system. The point is continuously recomputed to adapt to change in the object's trajectory. We propose a virtual object based dynamical systems (DS) control law to generate autonomous and synchronized motions for a multi-arm robot system. We show theoretically that the multi-arm + virtual object system converges asymptotically to the moving object. We validate our approach on a dual-arm robotic system and demonstrate that it can resynchronize and adapt the motion of each arm in a fraction of a second, even when the motion of the object is fast and not accurately predictable.