The growing population and increasing demand for surface transportation have highlighted the importance of maintaining safe and reliable civil infrastructures for daily use. Among all civil infrastructures, bridges are one of the most important elements in the transportation system. As such, to prevent any failures caused by aging and environmental impacts, bridges require periodic inspections. This becomes even more critical due to climate change and its effect on bridges, especially in the coastal regions. Most of the inspections conducted incorporate the visual type of evaluation due to its simplicity. However, with the current developments in new technologies, there is a need for more advanced techniques of structural health monitoring (SHM) methods to be incorporated in the maintenance programs for more accurate and efficient surveys. In this paper, non-destructive testing (NDT) methods applicable to steel bridges are reviewed, with a focus on methods applicable to local damage detection. Moreover, the methodology, advantages and disadvantages, and up-to-date research on NDT methods are presented. Furthermore, the application of novel NDT techniques using innovative sensors, drones, and robots for the rapid and efficient assessment of damages on small and large scales is emphasized. This study is deemed necessary as it compiles in one place the available information regarding NDT methods for in-service steel bridges. Access to such information is critical for researchers who intend to work on new or improved NDT techniques.
Normally, Laminated Rubber Bearing Pads (LRBPs) are directly placed between girders and piers and their role is to provide the bridge span with horizontal movement, and to transmit the gravity loads from the deck to the piers. Although not designed for seismic loads, they can act as a fuse, partially isolating the substructure from the superstructure and keeping the piers intact during earthquakes. However, recent investigations show that large relative displacement of superstructure against substructure caused by sliding at bearing (sliding between girders and LRBPs) can cause expansion joint failure or even bridge span collapse. Accordingly, proper restrainers should be selected to prevent large displacement. Among all types of restrainers, viscous dampers as passive energy dissipation devices have shown a great capacity in damping earthquake energy. This study investigates the effectiveness of a VD-LRBP system, a viscous damper in conjunction with LRBPs, in dissipating energy and reducing the displacement of the superstructure with reference to the substructure caused by sliding at bearing during a seismic event. A Finite Element (FE) model was first developed and validated using available experimental and numerical results. With the validated model, a 3D Nonlinear Time History Analysis (NTHA) was conducted on a reinforced concrete bridge model under various records of earthquakes using OpenSees, an open-source finite element software. The relative displacement histories were recorded for the bridge in two cases: 1- with only LRBPs and 2- with viscous dampers and LRBPs (VD-LRBP system). The results of this study show that applying viscous dampers can reduce the relative displacement of the superstructure with reference to the substructure for up to 60 percent. As importantly, it can also reduce the residual displacement after the earthquake to near zero.
Fiber-reinforced polymer (FRP) composites have gained increasing recognition and application in the field of civil engineering in recent decades due to their notable mechanical properties and chemical resistance. However, FRP composites may also be affected by harsh environmental conditions (e.g., water, alkaline solutions, saline solutions, elevated temperature) and exhibit mechanical phenomena (e.g., creep rupture, fatigue, shrinkage) that could affect the performance of the FRP reinforced/strengthened concrete (FRP-RSC) elements. This paper presents the current state-of-the-art on the key environmental and mechanical conditions affecting the durability and mechanical properties of the main FRP composites used in reinforced concrete (RC) structures (i.e., Glass/vinyl-ester FRP bars and Carbon/epoxy FRP fabrics for internal and external application, respectively). The most likely sources and their effects on the physical/mechanical properties of FRP composites are highlighted herein. In general, no more than 20% tensile strength was reported in the literature for the different exposures without combined effects. Additionally, some provisions for the serviceability design of FRP-RSC elements (e.g., environmental factors, creep reduction factor) are examined and commented upon to understand the implications of the durability and mechanical properties. Furthermore, the differences in serviceability criteria for FRP and steel RC elements are highlighted. Through familiarity with their behavior and effects on enhancing the long-term performance of RSC elements, it is expected that the results of this study will help in the proper use of FRP materials for concrete structures.
Fiber-Reinforced Polymer (FRP) bars/strands are the most promising alternative to their steel counterparts for reinforcing concrete elements due to their resistance to corrosion, lighter weight, higher strength and better durability. However, very limited research has been conducted in relation to non-destructive testing (NDT) methods that are applicable to damage detection in FRP bars or the detection of FRP reinforcements embedded in concrete. The ability to assess the condition of the relatively new and unique FRP reinforcements will increase the confidence of the construction industry in their use as a reliable substitute for steel reinforcements. This paper investigates the ability of two of the most commonly used NDT methods, Ground Penetrating Radar (GPR) and Phased Array Ultrasonic (PAU), in detecting FRP bars/strands embedded in concrete elements. GPR and PAU tests were performed on two slab specimens reinforced with GFRP (Glass-FRP) bars, the most commonly used FRP bar, with variations in their depth, size and configuration, and a slab specimen with different types of available FRP reinforcements. The results show that GPR devices can detect GFRP bars/strands and CFRP (Carbon-FRP) strands to some extent, and their detectability increases with the increase in their antenna center frequency. On the contrary, PAU is only capable of detecting GFRP and CFRP strands. The results of this paper also emphasize the need for further research and developments related to NDT applications to embedded FRP bars.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.