The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.

No abstract

This research aimed to improve the stability of Chlorella-Alginate Beads (CABs) by zeolite molecular sieves 13X. Dissolution time of synthesized Zeolite-Algal-Alginate Beads (ZABs) in a chelating agent revealed a significant improvement on the beads stability (78.5 ± 0.5 min) compared to the control beads (51.5 ± 0.5 min) under the optimum conditions of zeolite/alginate (1.5:1), pH 5 and 2% of beads. Monitoring cell growth during 5 days of incubation showed good biocompatibility of zeolite 13X. Scanning electron microscopy (SEM) indicated rough surface and spherical shapes of ZABs. Energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR) of ZABs confirmed the presence of zeolite 13X within the matrix. The zeta potential value of ZABs indicated that the beads were relatively stable. The findings of this research showed that zeolite molecular sieves 13X have the potential to improve the stability of algal-alginate beads compared to common beads.

The potential application of Zeolite 13X-Algal-Alginate Beads (ZABs) for copper biosorption was evaluated and compared with Blank-Alginate Beads (BABs) and Chlorella-Alginate Beads (CABs). Different process parameters were investigated including contact time, pH and initial metallic ion concentration. The findings indicated that the maximum biosorption capacity of ZABs was 85.88 mg/g biosorbent achieved at 180 min, pH 5 and initial metallic ion concentration of 150 mg/l whereas the maximum capacity of 70.02 and 77.32 mg/g biosorbent was obtained for BABs and CABs, respectively. ZABs showed higher stability than BABs and CABs in biosorption-desorption cycles. The kinetic and equilibrium data were analyzed via reaction/diffusion and Langmuir/Freundlich models, respectively. Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR) indicated bonded metal ion to the ABs. Hence, this study confirmed an improvement in stability and biosorption capacity of microalgal-alginate beads.

No abstract