Pores, voids, and cracks reduce the strength and economic value of travertine and limits its use. When used as a building material, travertine is often filled to increase its strength and extend its service life. The present experimental study investigates the bond between the pore filler in cement-based filling materials and travertine. For the purpose of the study, five travertine samples were filled with a cement-based filling material. A polarized microscope was used for the mineralogical-petrographic characterization of the travertines, while an image analysis software program (CLEMEX) was used to determine pore size and the number of travertines. A mercury intrusion porosimetry (MIP) technique was used to determine the size and the distribution of pores in the travertine, while the pore filling was identified and characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The pore structure, the bonding of the filler with the pore and the filler performance were then discussed. There was no gap between the pore filling and the Noche travertine sample. The best pore-fill-travertine bond was formed. An opening at the border of the pore filling and the travertine was visible in the Yellow travertine sample. Shrinkages and collapses were noted in the applied filling process, and filing shrinkage was also noted in the Red, Silver and Light travertine samples, preventing the establishment of a healthy connection between the pore filling and the travertine.
Bu çalışma, kireçtaşların parlatılabilirlik özellikleri üzerine abrasiv kafa devrinin etkisinin incelenmesi amacıyla yapılmıştır. Bu çalışmada ticari olarak üretimi yapılan iki adet kireçtaşı örneği kullanılmıştır. Parlatma işlemi, 30x30x2 cm boyutlarındaki kireçtaşı örneklerine aynı abrasiv serisi, sabit bant hızı, sabit kafa basıncı ve sabit su miktarında, 400 dv/dk, 600 dv/dk ve 800 dv/dk abrasiv kafa devrinde laboratuvar ölçekli cila makinasında yapılmıştır. Farklı devir hızlarında parlatılan örneklerdeki değişimin tanımlanması amacıyla; pürüzlülük parametrelerinden Ra, Rq ve Rz değerleri ve parlaklık ölçümleri yapılmıştır. Parlatma deneyleri sonucunda, artan abrasiv devir hızına bağlı olarak pürüzlülüğün azaldığı ve parlaklığın arttığı tespit edilmiştir. Bunun yanısıra; parlatma işleminde devir hızının etkisi ile yüzey topografyasının değiştiği Rq ve Rz pürüzlülük değerlerinin artmasıyla gözlenmiştir. Sonuç olarak, kireçtaşlarının farklı abrasiv kafa devrinde parlatılması ile pürüzlülük ve parlaklık değerlerinin değişim gösterdiği ve abrasiv devrinin pürüzlülük ve parlaklık özelliklerini önemli ölçüde etkilediği sonucuna varılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.