Blue phosphorescent organic light-emitting diodes (PHOLEDs) were fabricated with tin oxide (SnOx) nano-particles (NPs) deposited at the ITO anode to improve their electrical and optical performances. SnOx NPs helped ITO to increase the work function enhancing hole injection capability. Charge balance of the device was achieved using p- and n-type mixed host materials in emissive layer and the devices’ luminance and maximum external quantum efficiency (EQE) increased about nearly 30%. Tuning the work function using solution processed NPs allows rapid optimization of device efficiency.

No abstract

WO3 nanoparticles were able to manipulate surface work function and applied into ITO anode of OPV device performing higher power conversion efficiency (PCE) and short-circuit current density comparing to conventional OPV device without nanoparticles.

We investigated the effects of molecular ordering on the electro-optical characteristics of organic light-emitting diodes (OLEDs) with an emission layer (EML) of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV). The EML was fabricated by a solution process which can make molecules ordered. The performance of the OLED devices with the molecular ordering method was compared to that obtained through fabrication by a conventional spin coating method. The turn-on voltage and the luminance of the conventional OLEDs were 5 V and 34.75 cd/m2, whereas those of the proposed OLEDs were 4.5 V and 120.3 cd/m2, respectively. The underlying mechanism of the higher efficiency with ordered molecules was observed by analyzing the properties of the EML layer using AFM, SE, XRD, and an LCR meter. We confirmed that the electrical properties of the organic thin film can be improved by controlling the molecular ordering of the EML, which plays an important role in the electrical characteristics of the OLED.