Crossed-coil NMR probes are a useful tool for reducing sample heating for biological solid state NMR. In a crossed-coil probe, the higher frequency 1H field, which is the primary source of sample heating in conventional probes, is produced by a separate low-inductance resonator. Because a smaller driving voltage is required, the electric field across the sample and the resultant heating is reduced. In this work we describe the development of a magic angle spinning (MAS) solid state NMR probe utilizing a dual resonator. This dual resonator approach, referred to as “Low-E,” was originally developed to reduce heating in samples of mechanically aligned membranes. The study of inherently dilute systems, such as proteins in lipid bilayers, via MAS techniques requires large sample volumes at high field to obtain spectra with adequate signal-to-noise ratio under physiologically relevant conditions. With the Low-E approach, we are able to obtain homogeneous and sufficiently strong radiofrequency fields for both 1H and 13C frequencies in a 4 mm probe with a 1H frequency of 750 MHz. The performance of the probe using windowless dipolar recoupling sequences is demonstrated on model compounds as well as membrane embedded peptides.

KL 4 is a 21-residue peptide employed as a functional mimic of lung surfactant protein B which successfully lowers surface tension in the alveoli. A mechanistic understanding of how KL 4 affects lipid properties has proven elusive as the secondary structure of KL 4 in lipid preparations has not been determined at high resolution. The sequence of KL 4 is based on the C-terminus of SP-B, a naturally occurring helical protein that binds to lipid interfaces. The spacing of the lysine residues in KL 4 precludes the formation of a canonical amphipathic α-helix; qualitative measurements using Raman, CDc and FTIR spectroscopies have given conflicting results as to the secondary structure of the peptide as well as its orientation in the lipid environment. Here, we present a structural model of KL 4 bound to lipid bilayers based on solid state NMR data. Double-quantum correlation experiments employing 13 C-enriched peptides were used to quantitatively determine the backbone torsion angles in KL 4 at several positions. These measurements, coupled with CD experiments, verify the helical nature of KL 4 when bound to lipids, with (Φ, Ψ) angles that differ substantially from common values To whom correspondence should be addressed. Tel: 352-846-1506. Fax:352-392-3422. E-mail: jrlong@mbi.ufl for α-helices of (-60, -45). The average torsion angles found for KL 4 bound to POPC: POPG lipid vesicles are (-105, -30); this deviation from ideal α-helical structure allows KL 4 to form an amphipathic helix at the lipid interface.Keywords pulmonary surfactant; Surfactant Protein B; KL 4 ; sinapultide; lucinactant; peptide secondary structure; alpha-helix; hydrophobic moment; lipid bilayers; membrane proteins; phosphatidylcholine; phosphatidylglycerol; solid state NMR; dipolar recoupling; magic angle spinning Pulmonary surfactant is a lipid-rich fluid, containing key proteins, forming the inner mucosal lining of the alveoli. The primary functions of lung surfactant are to minimize surface tension at the alveolar air-fluid interface and provide a barrier against disease (1-5). Inadequate protein levels are a leading cause of respiratory distress syndrome (RDS) in premature infants (6-8).Current therapies for RDS primarily rely on administration of lung surfactant from exogenous sources (9-12). This reliance on xenogenic surfactant is due to the critical role of lung surfactant protein B (SP-B), a highly hydrophobic, 79 residue protein which functions as a homodimer containing 7 disulfide bridges (13). A multitude of roles for SP-B have been proposed and experimentally established. These include surface tension minimization, facilitation of lipid adsorption and resorption at the air-fluid interface, intracellular surfactant trafficking and improved respiratory dynamics in general (14).Synthetic, peptide-based lung surfactant replacements have received noticeable attention (15-17) as the use of synthetic analogs would remove the immunologic risks associated with animal-derived surfactant and allow for greater therapeutic consistency ...

Several approaches for utilizing dipolar recoupling solid-state NMR (ssNMR) techniques to determine local structure at high resolution in peptides and proteins have been developed. However, many of these techniques measure only one torsion angle or are accurate for only certain classes of secondary structure. Additionally, the efficiency with which these dipolar recoupling experiments suppress the deleterious effects of chemical shift anisotropy (CSA) at high magnetic field strengths varies. Dipolar recoupling with a windowless sequence (DRAWS) has proven to be an effective pulse sequence for exciting double-quantum (DQ) coherences between adjacent carbonyl carbons along the peptide backbone. By allowing this DQ coherence to evolve, it is possible to measure the relative orientations of the CSA tensors and subsequently use this information to determine the Ramachandran torsion angles phi and psi. Here, we explore the accuracies of the assumptions made in interpreting DQ-DRAWS data and demonstrate their fidelity in measuring torsion angles corresponding to a variety of secondary structures irrespective of hydrogen-bonding patterns. It is shown how a simple choice of isotopic labels and experimental conditions allows accurate measurement of backbone secondary structures without any prior knowledge. This approach is considerably more sensitive for determining structure in helices and has comparable accuracy for beta-sheet and extended conformations relative to other methods. We also illustrate the ability of DQ-DRAWS to distinguish between structures in heterogeneous samples.

No abstract

No abstract

No abstract

Behavioral bioassays were conducted to determine whether bed bug adults and nymphs prefer specific colored harborages. Two-choice and seven-choice behavioral color assays indicate that red (28.5%) and black (23.4%) harborages are optimal harborage choices for bed bugs. Yellow and green harborages appear to repel bed bugs. Harborage color preferences change according to gender, nutritional status, aggregation, and life stage. Female bed bugs prefer harborages with shorter wavelengths (lilac-14.5% and violet-11.5%) compared to males, whereas males prefer harborages with longer wavelengths (red-37.5% and black-32%) compared with females. The preference for orange and violet harborages is stronger when bed bugs are fed as opposed to when they are starved. Lone bed bugs (30%) prefer to be in black harborages while red harborages appear to be the optimum harborage color for bed bugs in more natural mixed aggregations (35.5%). Bed bug nymphs preferred different colored harborages at each stage of development, which is indicative of their developing eye structures and pigments. First instars showed no significant preference for any colored harborage soon after hatching. However, by the fifth instar, 27.5% of nymphs significantly preferred red and black harborages (which was a similar preference to adult bed bugs). The proportion of oviposited eggs was significantly greater under blue, red, and black harborages compared to other colored harborages tested. The use of visual cues such as specific colors offers great potential for improving bed bug monitoring tools by increasing trap captures.

Solid-state NMR spectroscopy at high magnetic fields is proving to be an effective technique in structural biology, particularly for proteins which are not amenable to traditional X-ray and solution NMR approaches. Several parameters can be selected to provide optimal sensitivity, improve sample stability, and ensure biological relevance for ssNMR measurements on protein samples. These include selection of sample conditions, NMR probe design, and design of pulse experiments. Here, we demonstrate and evaluate several engineering and experimental approaches for pursuing measurements on dilute proteins in heterogeneous mixtures.